User's Manual

25
TRUNKED FEATURES
Note: If you press the PTT switch before you press
the call response button, the response will be
transmitted to everyone in the talkgroup (a dis-
patch mode operation).
¥ After answering a Private Call, the callerÕs ID
number is stored in your radio as the Òlast ID
number receivedÓ.
¥ If your radio is conÞgured for Private Call II,
upon receiving a Private Conversation call, two
alert tones sounds, followed by the received
voice.
Making a Private Call
There are four phases in making a private call, namely
¥ initiating a private call,
¥ entering the desired radio ID number,
¥ sending the radio ID number, and
¥ having the conversation and hanging-up.
Initiating a Private Call
2. The green LED and call received status
annunciator, F
, will blink indicating that a call
is being received. You have 20 seconds to
answer the call before the radio automatically
returns to the home display.
3. Press the call response button or the call but-
ton.
4. The display shows the
incoming callerÕs ID
number, and the call
received annunciator will
turn off.
5. After viewing the callerÕs ID number, you can
decide to either talk privately (go to next step),
or not answer the call by pressing the call
response or call button to return to the home
display.
6. If you decide to answer the call, press the PTT
switch.
7. The callerÕs ID number
remains displayed for the
duration of the call.
8. When Þnished with conversation, press .
or the call response button to hang up.
ID: 722588
ID: 722588
9. The radio will return to
the home display.
1. Press / until CALL is
displayed.
2. Press l (the softkey below CALL).
PLANT POLICE
ZONE
MUTE
CALL
ATS2500
.
book Page 25 Monday
,
December 18
,
2000 7:39 PM