User's Manual

GETTING STARTED
18
Attaching the Dust Cover
1. Place the dust cover loop over the attached
antenna.
2. Slide the loop all the way down to the base
of the antenna.
3. Insert the dust cover tab into the slot above
the connector.
Dust Cover
Loop
Dust Cover
Tab
Slot for
Dust Cover Tab
4. Tighten the thumbscrew to hold the cover in
place. DO NOT overtighten the thumbscrew.
Thumbscrew
ATS2500
.
book Page 18 Monday
,
December 18
,
2000 7:39 PM