User's Manual

ManualsBrandsMotorola Solutions ManualsElectronicsPORTABLE 2-WAY RADIO

Table Of Contents

Phone

English

PHONE

If your radio has access to a telephone system,

you can make a phone call. To do this, your

radio must send an access code to a station

that connects it to a phone line. (Ask your dealer

for more details.) After completing a call, your

radio must send a deaccess code to hang up.

Note: In order to receive a phone call, your

radio must have a DTMF decode board

installed. Ask your dealer for details.

MAKING A PHONE CALL D

You can make a phone call by using the

preprogrammed Phone button (see page 9) or

the menu. D will appear on the LCD screen

when you are in Phone Mode.

To initiate a phone call:

Press the Phone Button.

–

or–

Do the following:

) to enter Menu Mode.

? until Phone

) to select Phone

4 You will hear a series of tones, indicating that

an access code is being sent automatically,

and see your access code;

–

or–

(for full-keypad radios only) enter your access

code using the keypad.

5 When you hear a dial tone:

(For full-keypad radios only) enter the phone

number using the keypad.

–

or–

? to select a number from the

phone list; then press the PTT button to send it.

–

or–

(For full-keypad radios only)

a Press and release the preprogrammed

Speed Dial button (see page 9) to use the

Speed Dial feature.

b Press the key (1 to 9) corresponding to the

number you want to call, or press “0” if you

want to call the last number dialed.

#WarisN/APrefUser.book Page 35 Tuesday, November 3, 1998 2:27 PM