User's Manual

31
Creating Entries
Enter the number or address. For phone
numbers, use the 10-digit format. For email
addresses, see “Entering Text” on page 53.
Tip: Press A under Browse to select a number
or address from Contacts, the recent calls
list, or Memo.
When you are finished, press O.
6 If you want to change the default Speed Dial
numberoracreateavoicenamefortheentry,
select [Options]. See “Assigning a Speed Dial
Number or Voice Name”.
7 If you want to add more numbers or addresses
to the entry:
Scroll past the information you already entered.
Enter the additional information for the entry
using step 3 through step 6. You must assign a
name to the entry, if you have not already.
8 Press A under Done.
Assigning a Ring Tone or Picture
1 Ifyouhavenotalready,select[Ring
Tone/Picture].
2 If you want to assign a ring tone from the list of
ring tones:
With Ringer highlighted, scroll left or right to
choosearingtone.-or-
Select Ringer. Select the ring tone you want to
assign.
3 Ifyouwanttoassignapicturefromthemedia
center:
Scroll to Picture. Scroll left or right to choose a
picture. -or-
Select Picture. Select the picture you want to
assign.
Only pictures that can be assigned to Contacts
entries are displayed. Some large pictures
cannot be assigned.
Tip: If an entry has a picture assigned and you
want the entry to have no picture, select
[No Picture] or press A under Unassign.
4 When you are finished, press A under Back.
Assigning a Speed Dial Number or
Voice Name
1 Ifyouhavenotalready,select[Options].
2 The default Speed Dial number assigned to a
phone number is displayed in the Speed # field.
This is always the next available Speed Dial
location.