User's Manual

26
MOTOtalk
Ending a Private Call
A Private Call will end if there is no communication
for 6 seconds. The display will return to the idle
screen.
Making a MOTOtalk Call
1 If you want to make a Private call, enter the
name or 10-digit number (for example,
9545555555) you want to call on your channel.
To make a code call, enter the desired code if
not already displayed. For code calls skip to step
2.
2 Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
the MOTOtalk tone.
3 Release the PTT button to listen.
Note: If you get a bad key press tone,
immediately following the talk permit tone,
it means that nobody is in MOTOtalk
mode, or they are in a different channel or
out-of-range.
Receiving a MOTOtalk Call
1 When a call comes in, an incoming tone (2
beeps) play first and when the caller finishes
talking a single beep plays.
2 Wait for the caller to finish speaking.
3 If you want to respond, press and hold the PTT
button on the side of your phone. Begin talking
after your phone emits the MOTOtalk tone.
4 Release the PTT button to listen.
Assigning a MOTOtalk
Number in Contacts
For information on assigning a MOTOtalk number
to an existing entry in Contacts, see “Contacts” on
page 31.
Recent Calls
For information on viewing, storing or deleting
recent calls, see “Recent Calls” on page 29.
Making Emergency Calls from
MOTOtalk
Your phone supports emergency calling.
Emergency phone calls can be made even when
you are not connected to the network as long as
there is a network to connect to.
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.