User's Manual

24
MOTOtalk
Codes help minimize interference from unwanted
messages and other disturbances when you are on
the same channel as others. To have a
conversation, all parties must be on the same
channel and code.
Note: All parties who are on your code and
channel can hear your conversation.
To set a channel:
1 From the idle screen, press A under Edit.
2 Scroll to Channel.
3 Press A under Edit.
4 Select a Channel.
To set a code:
1 From the idle screen, press A under Edit.
2 Scroll to Code.
3 Press A under Edit.
4 Select a Code.
Receive All
1 You can also set your phone with Code set to
Receive All. Your phone will receive calls from
any phone that has been set to the same
Channel regardless of the Code (1-15).
2 If you receive a call while in Receive All, your
phone display will change from Receive All to
the Code on which the transmission was
received.
3 You may reply to that code within 6 seconds
after the caller finishes talking by pressing and
holding PTT. After the 6 seconds expire, the
code reverts back to Receive All.
Note: You cannot initiate a call when the code is
set to Receive All. If you press the PTT
button when in Receive All it will ask you
to enter a code.
Contcs
d
S
MT Ready
Code:Receive All
Channel:4
Edit
status icons
text area
menu icon
display options