User's Manual

Table Of Contents
23
MOTOtalk Icons
2 Scroll to Direct Launch and press A under
Change.
3 Select On.
Note: If Direct Launch is set to On, you will not
see the MT Options screen. In order to
have access to your setup options, Direct
Launch must be set to Off. Or you can
access setup options while in MOTOtalk
by pressing A, then DT Options.
To turn off Direct Launch
Select Off. Your phone now displays MT Options
when you select MOTOtalk from the main menu.
State Tone
To set your phone to notify you with a tone that you
are in MOTOtalk mode:
1 From the main menu, select MOTOtalk.
2 Select Setup.
3 Scroll to State Tone and press A under
Change.
4 Select the time frame during which you want to
be notified that you are in MOTOtalk mode.
For example, if you select 1 hour, you will be
notified that you are in MOTOtalk mode.
To turn off State Tone
Select Off.
MOTOtalk Icons
Channels and Codes
Your phone has 10 channels and 15 codes.
Channels and codes are divided into frequencies
that allow you to make and receive phone calls.
Other parties may be taking on the same channel.
MOTOtalk Options
(intermediate screen):
-Go To MOTOtalk (launch
MOTOtalk)
-Setup
-Help
MOTOtalk Type
-Code
-Channel
MOTOtalk In Use
No Signal - Indicates you are
off-network and in MOTOtalk
mode.