User's Manual

22
MOTOtalk
Proceed as if making Direct Connect call. MT:
Transmit appears on the first line of the display.
To answer a code call using MOTOtalk:
Proceed as if answering a Direct Connect call. MT:
Receive appears on the first line of the display.
The talk permit tone emitted from your phone when
using MOTOtalk is 4 beeps and is longer than the
standard tone heard with on-network Direct
Connect and Group Connect calls.
Note: If you receive an error message when
making a call using MOTOtalk, there may
be no parties on your channel and code or
you are out of range.
To set your phone to network mode when
MOTOtalk is active:
1 From the main menu, scroll to MT Options and
press A under Select.
2 Select Exit MOTOtalk.
Switching to Network Please Wait displays.
After a few seconds, the network idle screen
appears.
Switching to MOTOtalk
1 Scroll to MOTOtalk on the main menu.
2 Select Go to MOTOtalk, you’ll see on the
display: Switching to MOTOtalk please wait.
You’ll be on MOTOtalk screen.
Setup Options
MOTOtalk setup options are available in the MT
Options screen both in network and MOTOtalk
modes.
To access MT Options in network:
1 From the main menu, select MOTOtalk.
2 Select Setup.
To access MT Options in MOTOtalk:
1 From the main menu, select MT Options.
2 Select Setup.
You can set your phone to launch directly into
MOTOtalk when you select MOTOtalk from the
main menu. You can also set your phone to notify
you periodically with a tone that you are in
MOTOtalk mode.
Direct Launch
To set your phone to launch MOTOtalk when you
select MOTOtalk from the main menu:
1 From the MT Options screen, select Setup.