User's Manual

51
Advanced Features
Note: All 4 features can be turned off as a
package.
Making Talkgroup or Hub
Calls
Talkgroup or Hub calls allow you to listen to up to 4
talkgroups (one primary and up to 3 secondary
talkgroups equals a Hub). You can only initiate a
call on the primary talkgroup but can respond to a
call on any of the secondary talkgroups.
Initiating a Group Call
1 Press and hold the PTT button to initiate a Hub
call on your Primary Talkgroup.
All phones that are affiliated with a Hub that has
your Primary Talkgroup as either a Primary or
Secondary Talkgroup will receive your group call if
they are not already engaged in an active call.
The first line of the display will indicate the Hub
number or alias followed by Primary or Secondary
Talkgroup. This can be assigned an alias. The third
line of the display indicates the Private-ID of the
unit initiating the group call, which can also be
aliased.
Note: Only valid if you have One Touch PTT
enabled, otherwise you must affiliate with
a group and then press the PTT.
1 Enter the #, then the Primary Talkgroup.
2 Press A under Join.
3 Press and hold the PTT button to initiate a group
call.
• Status Icons — Hub-in-use and Scan icons (if
scan is set
• Title — Hub ID or alias (for example, Police)
•Line 1 — Primary Talkgroup icon with Private ID
or alias (for example, Sunrise), or secondary
Talkgroup icon with Private ID or alias
depending on which TalkGroup transmission is
occurring
• Line 2 — Blank when transmitting; during
reception shows transmitter's Private ID or alias
(for example, John) being received
John
Sunrise
Hub Police
Contcs
Exit
Status Icons
Title
Line 1
Line 2