Motorola iDEN Digital Multi-service Data-capable Phone i325 Phone User’s Guide FCC PACKAGE DRAFT @NNTN5506A@ NNTN5506A
IMPORTANT NOTICE: PLEASE READ PRIOR TO USING YOUR PHONE The SIM card provided in this kit is intended for use with the phone provided in this package. Loss of certain features will result when using a SIM card from one of the following models: i30sx, i35s, i50sx, i55sr, i58sx, i60c, i80s, i85s, i88s, i90c, i95cl series, and the i2000 series. For more information on SIM card compatibility, go to www.motorola.com/iden/support.
Contents Getting Started........................................... 1 Locating Your SIM Card ....................................2 Activating Service..............................................5 Powering On and Off.........................................5 Enabling Over-the-Air Security..........................6 Finding Your Phone Number.............................6 Phone Basics ....................................................7 SIM Card Security ...........................................
Turning Off Call Forwarding ............................33 Forwarding Missed Calls .................................33 Viewing Call Forwarding Settings....................34 Additional Calling Options...................... 35 Call Waiting .....................................................35 Call Hold..........................................................36 3-Way Calling ..................................................36 Creating Pauses and Waits While Dialing.......37 Making International Calls ...
Message Center ..............................................60 Voice Mail Messages ............................... 61 Receiving a Message ......................................61 Accessing Voice Mail from the Message Center ...................................61 Sending Unanswered Calls to Voice Mail .......61 MOSMS Messages ................................... 62 Setting Up........................................................62 Receiving a Message ......................................
Viewing Your Approximate Location ...............95 Enhancing GPS Performance .........................96 Updating Satellite Almanac Data.....................98 Setting Privacy Options ...................................98 Using GPS with Map Software ........................99 Voice Records........................................ 102 Creating Voice Records ................................102 Playing Voice Records ..................................102 Labelling Voice Records................................
Electro Magnetic Interference/Compatibility..122 Medical Devices ............................................122 Operational Warnings....................................123 Operational Cautions.....................................124 Accessory Safety Information........................125 MOTOROLA LIMITED WARRANTY ...... 127 Limited Warranty Motorola Communication Products (International) ..................................... 131 Patent and Trademark Information ...... 135 Index ...........................
DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i325 Model Number: H62XAH6RR1AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.
Getting Started fixed antenna volume controls audio jack Power button. Navigation key — press the arrows to scroll through menus and lists. Push-To-Talk (PTTT) button power button Menu key — accesses context-sensitive menus. Option key — selects the option appearing above it on the display. option keys speaker (in back) space key Send key — places phone calls. microphone back key emergency call button Note: Throughout this User Guide, the option keys will be represented by A.
Getting Started To start using your i325 phone: • • • • Make sure your SIM card is in place. Charge the battery. Activate your service. Enable over-the-air security. Note: To screw in antenna water seal is critical. Removing the Battery Door 1 Make sure the phone is powered off. 2 Slide the release button forward until it releases the battery door. 3 Remove the battery door from the back of your phone.
Locating Your SIM Card If your SIM card is not in the SIM card holder, it may be in the box your phone came in, attached to a piece of white plastic about the size of a credit card. If this is the case, carefully detach your SIM card from the surrounding plastic and insert it as described in “Inserting Your SIM Card” on page 13. 3 Replace the battery door and press it gently until you hear a click. If there is no SIM card in your phone or the box, contact your service provider.
Getting Started 3 Plug the other end of the charger into the accessory connector. Charging Times See your battery and charger to determine the appropriate charging time. Battery Charger Rapid Mid-Rate High 2 hours Performance SC 4 hours Extra Capacity 2.5 hours 5.5 hours Maximum Capacity 3.5 hours 7.5 hours Charger Attached appears on the display. Tip: To remove the charger from the accessory connector: Press the buttons on the sides of the plug. Pull the plug straight out.
Activating Service 2 Remove the battery by pushing the battery toward the antenna and lifting it out. Activating Service The first time you power on your phone, you must be in your local calling area. This activates your service. Powering On and Off To power your phone on: Battery Use and Maintenance • The Motorola iDEN Approved Lithium Ion chargers provide optimum performance. Other chargers may not fully charge the iDEN Lithium Ion battery or may yield a reduced number of lifetime charge cycles.
Getting Started As your phone connects to the network, you will see a connecting message. When the idle screen appears, the phone is ready to use.
Phone Basics 3 Press A under Select. 4 Scroll to see your information: • Name — Enter your name. See “Entering Text” on page 48. • Line 1 and Line 2 — your phone numbers for phone lines 1 and 2. These are filled in when you receive your first phone call after enabling over-the-air security on your phone. • Private ID — Your Private ID is the number that others use to contact you using Private calls. It is filled in when you receive your first Private call. • Group ID — the number of the Hub you have joined.
Getting Started Display Options Menu Key Two display options appear at the bottom of most screens. You select a display option by pressing the option key below it. Many features provide context-sensitive menus that let you access related features and actions. The S icon appears any time a context-sensitive menu is available. Press m to access the menu. Menus and Lists Your phone’s features are arranged in menus, submenus, and lists.
Phone Basics Contacts View, store, edit contacts. new contact form See page 25. list of contacts Contacts menu e Messages [Compose Message] Voice Mail Inbox Drafts Sent Items SMS Net Alert Access messages. See page 57. f Call Forward Set call forwarding options. See page 32. g Memo Store a number to access later. See page 43. h Call Timers Phone usage information. See page 39. Profiles new profile form list of profiles Groups of settings you apply together. See page 109.
Getting Started Status Icons Status icons appear in the two rows at the top of the display. Some appear at all times. Others appear only when your phone is engaged in certain activities or when you have activated certain features. abcd efgd Battery Strength — More bars on the battery indicate a greater charge. Talkgroup Icon — Your phone is active as a group call Emergency Call — Indicates your phone is active on an emergency call. GHI J KL Call Forward — Your phone is set to forward calls.
SIM Card Security SIM Card Security Your SIM card protects your personal information. The SIM card stores all your Contacts information. Since this information is stored on your SIM card, not in your phone, you can remove the information by removing your SIM card. Note: Except for making emergency phone calls, your phone will not function without the SIM card. To prevent unauthorized use of your phone, your SIM card is protected by a PIN that you enter each time the phone is powered on.
Getting Started Turning the PIN Requirement On and Off When the SIM PIN requirement is on, you are prompted to enter your PIN each time you turn on your phone. Note: If a SIM PIN is required, your phone will not function until the SIM PIN is entered, except for making emergency calls. When the PIN requirement is off, your phone can be used without entering a PIN. Important: When the SIM PIN requirement is off, the personal data on your SIM card is not protected.
SIM Card Security Inserting and Removing Your SIM Card Important: Do not touch the gold-colored areas of your SIM card. Switching SIM Cards Moving your SIM card from one phone to another moves all your Contacts information, but erases other information.
Getting Started Locking the Keypad Removing Your SIM Card Important: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary. 1 With your phone powered off, remove the battery door and battery. 2 While holding the tab down, slide your SIM card out of the SIM card holder. SIM card holder Locking the phone’s keypad prevents its buttons from being pressed.
Accessories Note: Emergency Group Accessories To order accessories, log on to our Web site at www.motorola.com/store/iden or contact your Motorola Authorized Retailer. For More Information If you have questions about your i325 phone, contact your sales representative or your service provider.
Making Calls Receiving Calls Your i325 phone makes two types of calls: digital cellular phone calls and Private calls. With Private calls, you use your phone as a long-range, digital walkie-talkie. Phone Calls Phone Calls 1 Enter the number you want to call. 2 Press s to place the call. 3 Press e to end the call. Private Calls 1 Enter the Private ID you want to call. 2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound.
Call Icons Call Icons • • • • • When you make a call, call icons appear in the text area of the phone’s display. From the Keypad 2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound or vibrates. 3 Release the PTT button to listen. X Placing a phone call. W Receiving a phone call. Y Phone call is active.
Making Calls From the main menu, select Recent Calls. 2 Scroll to the name or number you want to call. From Contacts If you have numbers stored in Contacts, you can use these numbers to make calls. For information on entering numbers into Contacts, see “Creating Entries” on page 27. Calling from the Contacts List 1 From the main menu, select Contacts. 2 Scroll to the name or number you want to call. Tip: To find Contacts entries faster, use the keypad to enter the first letter of the name.
Using Speakerphone If you have created a voice name in Contacts for the number you want to call, say the voice name into your phone to enter the number. See page 26 for information on voice names. Your phone plays the name back to you. If you are making a Private call, press the PTT button to place the call. If you are making a phone call, the call is placed automatically. Tip: To stop a phone call from being completed, press e.
Making Calls Using Mute Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call. To turn mute on: Press A under Mute. While mute is on, Unmute appears as a display option. To turn mute off: Press A under Unmute. Making Emergency Phone Calls Your phone supports emergency calling. Emergency phone calls can be made even when your SIM card is blocked or not in your phone. Dial 911 to be connected to an emergency response center.
Call Alerts Receiving Call Alerts Sending a call alert lets the recipient know you want to talk to him or her on a Private call. When you receive a call alert, you must answer, queue, or clear it. You cannot receive phone calls or Private calls until you do. When you send a call alert, the recipient’s phone emits a series of beeps and displays your name or Private ID.
Call Alerts Viewing Date and Time Deleting Call Alerts To view the date and time a call alert was received: To delete a call alert from the queue: 1 2 3 4 1 From the call alert queue, scroll to the call alert you want to delete. 2 Press m. 3 Select Delete. 4 Press A under Yes to confirm. From the main menu, select Call Alert. Scroll to the call alert you want information on. Press m. Select View.
Recent Calls The recent calls list stores the numbers of the 20 most recent calls you have made and received. To view the recent calls list: 1 From the idle screen, press the down arrow on the navigation key. -orFrom the main menu, select Recent Calls. 2 Scroll through the list. If the number of a recent call is stored in Contacts, the name associated with the number appears on the recent calls list. An icon appears beside the name or number indicating the Contacts type of the number used in the call.
Recent Calls 3 To store the number as a new entry, select [New Contact]. -orTo store the number to an existing entry, select the entry. 4 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign to the number. For information on Contacts types, see page 25. 5 If you want to add more information to the entry, follow the applicable instructions in “Creating Entries” on page 27. 6 Press A under Done.
Contacts • A Contacts type — Each number or address stored must be assigned a Contacts type: Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses. A Mobile phone number B Private Private ID Information stored in Contacts is saved on your SIM card. C Work1 phone number A Contacts entry contains: D Work2 phone number • A name — A name is required if you are storing more than one number or address to the entry; otherwise, it is optional.
Contacts Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See “Creating Pauses and Waits” on page 30. • A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it. • A voice name — If you create a voice name for a number, you can then dial that number by saying the voice name into your phone.
Creating Entries Showing Only Private IDs and Groups To set Contacts to show only entries that contain Private IDs and Group entries: 1 From the Contacts list, press m. 2 Select Filter. 3 With Show Prvt/Grp highlighted, press A under Select. To set Contacts to show all entries: 1 From the Contacts list, press m. 2 Select Filter. 3 With Show All highlighted, press A under Select. Creating Entries A number or address and a Contacts type are required for all Contacts entries. Other information is optional.
Contacts Scroll to the Contacts type you want to assign. Press A under Select. 5 To store a number or address: With the # field (or ID for an email address, or IP for an IP address) highlighted, press A under Change. Enter the number or address. For phone numbers, use the 10-digit format. For email addresses, see “Entering Text” on page 48. Tip: Press A under Browse to select a number or address from Contacts, the recent calls list, or Memo. When you are finished, press A under Ok.
Editing Entries To store numbers to Contacts from Memo, see “Memo” on page 43. 4 Follow the applicable instructions in “Creating Entries” on page 27 to edit the various fields. To store numbers to Contacts from the idle screen: Deleting Entries 1 Use the keypad to enter the number you want to store. 2 Press m. 3 Select Store Number. 4 To store the number as a new entry, select [New Contact]. -orTo store the number to an existing entry, select the entry.
Contacts Note: If an entry contains only one number or address, deleting the number or address deletes the entry. Checking Capacity To see how many numbers are stored in Contacts: 1 From the Contacts list, press m. 2 Select Capacity. Creating Pauses and Waits When storing a number, you can program your phone to pause or wait between digits while dialing. A pause makes your phone pause for 3 seconds before dialing further. A wait makes your phone wait for your response before dialing further.
Accessing Contacts with GSM Phones Note: The network translates the “+” into the appropriate international access code needed to place the call. 2 Enter the country code, city code or area code, and phone number. For information about making international calls, see “Making International Calls” on page 37. Accessing Contacts with GSM Phones If you plan to use the information stored in Contacts with an i2000, i2000plus, or any other GSM phone, you must purchase CompanionPro. Go to www.motorola.
Call Forwarding Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently. Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display: L Phone line 2 is active; calls to phone lines 1 and 2 are being forwarded.
Turning Off Call Forwarding Tip: In some fields, you can select an option by scrolling left or right instead of pressing A under Change. Turning Off Call Forwarding If you don’t want all your calls forwarded, turn the feature off: 1 2 3 4 5 6 7 From the main menu, select Call Forward. Press A under Change. Select All Calls. Scroll to To. Press A under Change. Scroll to Off. Press A under Select. All your calls are now sent to your phone.
Call Forwarding Press A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 8 Press A under Ok. 9 Repeat step 4 through step 8 for If No Answer and If Unreachable. When you are finished, press A under Back. Viewing Call Forwarding Settings 1 2 3 4 5 6 From the main menu, select Call Forward. Press A under Change. Select All Calls. Scroll to To. Press m. Select Retrieve Status.
Additional Calling Options Call Waiting Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. Switching Between Calls When you accept a second call, the display shows the name or number of each call, with an icon indicating which call is active: Y Phone call is active. Z Phone call is on hold.
Additional Calling Options To turn off Call Waiting for the next call you make or receive: To end the second call and make the call on hold active again: 1 From the main menu, select Settings > Phone Calls > Call Waiting. 2 Press A under Change. 3 Scroll to Off. 4 Press A under Select. To make the call on hold active and put the active call on hold: Call Waiting is turned back on when you end the call. Call Hold Press e. Press A under Switch.
Creating Pauses and Waits While Dialing 7 Press A under Select. Both calls are now active and appear on the display. Making International Calls Note: This feature may not be offered by your service provider. Creating Pauses and Waits While Dialing Plus Dialing lets you place an international call to most countries without entering the local international access code. You can enter a pause or wait while dialing a number.
Additional Calling Options To set your phone to call a Private ID you choose: Joining a Talkgroup 1 From the main menu, select Settings > 2-Way Radio > One Touch PTT > Assigned Number. 2 To enter the Private ID you want your phone to call every time you press the PTT button: Your sales representative or your service provider establishes Talkgroups for you and assigns each Talkgroup a Talkgroup number. You can choose a name for each of your Talkgroups when you create entries for them in Contacts.
Call Timers Receiving Group Calls Call Timers To answer a group call: Call timers measure the duration of your phone calls, Private or group calls, and circuit data use, as well as the number of Kilobytes sent and received by your phone: Proceed as if answering a Private call. Only one person at a time may speak on a group call. The Private ID or name of the person who is speaking will appear on the display below the Talkgroup number.
Additional Calling Options 2 Select the feature you want to view or reset. 3 To view a feature without resetting: Press A under Done when you are finished viewing. -or- 2 With the phone’s display facing up, insert a data cable’s connector into the accessory connector, until you hear a click. To reset a feature: Press A under Reset. Press A under Yes to confirm. Note: The values displayed by Call Timers should not be used for billing. Call timers are estimates only.
Making TTY Calls Making TTY Calls Note: This feature may not be offered by your service provider. To use your phone to make phone calls using a teletypewriter (TTY) device: 1 Connect one end of a 2.5mm cable into the audio jack on your phone. Connect the other end of the cable to your TTY device. 2 Make sure that your phone’s TTY feature is on and select the TTY mode you want to use. 3 Use your phone to enter phone numbers and make calls.
Additional Calling Options To change mode during a call using your phone: 1 Press m. 2 Select in Call Setup > TTY > Type. 3 Select the mode you want. To change mode during a call using your TTY device, issue one of the following commands: • “VCO please” — to select VCO mode • “HCO please” — to select HCO mode • “HCO off please” — to turn off HCO mode Important: When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear.
Memo Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo: 1 From the main menu, select Memo. 2 Enter the number using your keypad. 3 Press A under Store. To view the memo later: 1 From the main menu, select Memo. To delete the memo: 1 From the main menu, select Memo. 2 Press and hold A under Delete. 3 Press A under Store. 3 1 2 3 4 To store the memo number to Contacts: From the main menu, select Memo. Press m. Press A under Select.
Ring Tones Setting Your Phone to Vibrate To set the ring tone your phone makes when you receive phone calls, message notifications, or call alerts: If your phone includes a vibrate feature, you can set your phone to vibrate when you receive phone calls, Private calls and group calls, messages notifications, or call alerts. 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign.
Ring and Vibrate Always Vibrate Instead of Ringing If your phone includes a vibrate feature: 1 From the main menu, select Ring Tones > VibeAll. 2 Scroll left or right to set VibeAll to On. Tip: Pressing the volume controls to turn down the volume as far as possible sets VibeAll to On. Do Not Ring for Some Features To set individual ring options for phone calls, messages notifications, or call alerts: 1 From the main menu, select Ring Tones. 2 Make sure VibeAll or SilentAll is set to Off.
Ring Tones 3 Scroll through the list of ring tones to the one you want to assign. Highlighting a ring tone lets you hear it. 4 Press A under Assign. 5 Select A Contact. 6 Scroll to the Contacts entry you want to assign the ring tone to. 7 Press A under Select. Viewing Ring Tone Assignments 1 2 3 4 5 6 From the main menu, select Ring Tones. Make sure VibeAll or SilentAll is set to Off. Highlight any ring tone. Press m. Select Overview. Scroll to view ring tones assigned to features and Contact entries.
Deleting Custom Ring Tones Deleting Custom Ring Tones To delete a custom ring tone: 1 2 3 4 5 6 From the main menu, select Ring Tones. Make sure VibeAll or SilentAll is set to Off. Scroll to the ring tone you want to delete. Press m. Select Delete. Press A under Yes to confirm.
Entering Text You can enter text into your phone using the traditional method of pressing a key several times for each character, or by pressing a key once for each letter while words likely to be the one you want are chosen from a database. You can also enter symbols and numbers into a text field. In screens that require you to enter text, you see the following icons near the top right corner. These icons tell you which text input mode you are using: l Alpha — Press a key several times for each character.
Special Function Keys 2 Type a word by pressing one key for each letter. For example, to type “test” press 8 3 7 8. The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing. 3 If the word that appears is not the desired word, press 0 to change the word on the display to the next most likely word in the database. Repeat until the desired word appears.
Entering Text These icons appear in the top row of your display: Using Symbols Mode m Shift is on. 1 Select Symbols as your text input mode. n Caps lock is on. When neither of these icons appear, letters typed are lowercase. Note: Your phone automatically makes the first letter of a sentence uppercase. Punctuation Press 1 or 0 to insert punctuation. Continue to press the key to view the list of symbols available through that key. Pause to select the symbol you want.
Advanced Features Note: All 4 features can be turned off as a package. Making Talkgroup or Hub Calls Talkgroup or Hub calls allow you to listen to up to 4 talkgroups (one primary and up to 3 secondary talkgroups equals a Hub). You can only initiate a call on the primary talkgroup but can respond to a call on any of the secondary talkgroups. Initiating a Group Call Note: Only valid if you have One Touch PTT enabled, otherwise you must affiliate with a group and then press the PTT.
Advanced Features Responding to a Secondary Talkgroup Storing a Talkgroup or Hub in Contacts 1 To respond to a call on a Secondary Talkgroup, press the PTT button. Although your service provider establishes the members of a Hub, you can store a Group or Hub in your Contacts. Turning Scan On and Off 1 From Settings select DC/GC Options. Select Scan under On or Off. -or Press A to disable Scan. Note: When Scan is disabled, you will not be able to make or receive calls on your Secondary Talkgroups.
Emergency Group Call Placing an Emergency Group Call You can prioritize access to your Hub by pressing and holding the emergency button. This will provide other members in the Hub visual and audible indications and convey that you are in an emergency. 1 Press and hold the [SPEAKER KEY GRAPHIC] for 3 seconds. The phone will emit an emergency start to indicate that you have successfully requested an emergency call. 2 Press the PTT button to talk.
Advanced Features Displaying Emergency Group Call in Recent Calls ! Emergency Electricians Adam John Contcs Exit Title Line 1 Line 2 Line 3 • Title — Emergency Hub icon with either Hub ID or alias (for example, Emergency) • Line 1 — Talkgroup on which call was received: If Primary Talkgroup, display icon with Talkgroup ID or alias; if secondary just display Private ID or alias • Line 2 — Emergency hub call initiator icon with initiator's alias or Private ID • Line 3 — Blank when transmitting; shows tran
Isolated Site Operation (ISO) Isolated Site Operation (ISO) ISO allows communication on the last selected Hub to continue within a single cell site when connectivity to the network is lost by allowing the cell to operate in a local, one cell only mode. The phone can place talkgroup calls - on the last selected Hub - until the ISO condition is cleared. Entering ISO The phone will enter the ISO state when its cell becomes isolated from the network, assuming the phone has no available neighbor cells.
Advanced Features • Dialing 1 Press A under Alert. You’ll see Ready to Alert on the display. 2 Press A under Select to select Status Messages. You’ll see a list of messages left on your SIM. 3 Press A under Select to select the desired Message. Sending a Status Message Once you’re in the Ready to Alert screen, press the PTT button to send a message. After selecting both a Status Message and a desired target ID, press the PTT button to send the message.
Your Messaging Services Your phone lets you send and receive a variety of messages. Messaging services available to you depend on your service provider. Voice Mail All service providers offer voice mail message service. For information on accessing your voice mail messages, see “Voice Mail Messages” on page 61.
Your Messaging Services • Inbox — access MMS messages you have received. • Drafts — access MMS messages you have created and saved but not sent. • Sent Items — access MMS messages you have created and sent. • SMS — access Short Message Service (SMS) messages you have received • Depending on your service provider, you may also have a Net Alert option.
Receiving Messages When you receive a voice mail message or text message, you have 2 ways to access the message: • Respond to the message notification that appears when the message is received. • Dismiss the message notification and access the message later through the message center. Message Notifications When you receive a message, your phone notifies you with text on the display and a notification tone or vibration. You can access the message or dismiss the notification.
Receiving Messages Message Center All your messages are stored in the message center. The message center shows how many messages you have of each type. To access your messages through the message center: 1 Press A under Mesg. -orFrom the main menu, select Messages. 2 Scroll to the type of message you want to access. 3 Press A under the display option on the left.
Voice Mail Messages Note: To receive voice mail messages, you must first set up a voice mail account with your service provider. Receiving a Message When you receive a voice mail message, New Voice Mail Message appears on the display. To call your service provider’s voice mail system and listen to the message: Sending Unanswered Calls to Voice Mail To send a phone call to voice mail instead of answering it: Press e. -orPress A under No.
MOSMS Messages 6 With the Srvc Cntr No field highlighted, press A under Change. Note: If your text messaging service is not MOSMS, do not read this section. Read “MMS Messages” on page 68 and “Other Text Messages for Phones with MMS” on page 85. To determine your text messaging service, see “Your Messaging Services” on page 57. 7 With the Expire After field highlighted, press A under Change. Your phone sends SMS messages using MOSMS.
Reading from the Message Center 3 To keep the message, scroll to the end of the message and press A under Save. -orTo delete the message, scroll to the end of the message and press A under Delete. To dismiss the message notification: Press A under Exit. This icon w appears on the display, reminding you that you have a new message. If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on.
MOSMS Messages To use a quick note: Press A under Browse. Scroll to the quick note you want. Press A under Select. For more information on quick notes, see “Using Quick Notes” on page 65. If you want to add your signature: Press m. Select Add Signature. When you are finished, press A under Ok. 5 If you want to send the message, press A under Yes.
Creating and Sending Messages 3 Select Compose SMS. The message is automatically addressed to the phone number you chose. 4 Follow step 4 through step 8 of “Creating and Sending Messages” on page 63. Using Quick Notes Quick notes are short, pre-written text messages that you can create, edit, and send. You can store up to 20 quick notes. A quick note may be up to 30 characters long. To create a quick note: 1 From the main menu, select Messages > Quick Notes > [New Quick Note]. 2 Press A under Create.
MOSMS Messages These icons appear next to messages in the outbox: Deleting Sent Messages 5 Sent and confirmed. 9 Send attempted. 0 Forwarded. 4 Received by addressee. 6 Not received by addressee. 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to delete. 3 Press m. 4 Select Delete. 5 Press A under Yes to confirm. 8 Send failed. 7 Re-sent. R Locked.
Managing Memory Scroll to Unlock to unlock the message. 3 Select Memory Meter. 5 Press A under Select. Managing Memory Your text inbox, outbox, and drafts folder have a set amount of memory available for storing messages. The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some. The outbox and drafts folder share memory space. Together they can hold 30 messages.
MMS Messages Note: If your text messaging service is not MMS, do not read this section. Read “MOSMS Messages” on page 62 instead.To determine your text messaging service, see “Your Messaging Services” on page 57. Multimedia Messaging Service (MMS) lets you send and receive text messages. MMS messages may include attached audio files.
Creating and Sending Messages When you receive your phone, all musical ring tones in the list of ring tones can be included in a message. However, some ring tones you download to your phone may not be in the required format to be included in a message. The non-musical ring tones in the list of ring tones when you receive your phone cannot be included in a message.
MMS Messages Message Size Sending a Basic Message You can create and send messages of up to 2 KB, not including an attached audio recording. An attached audio recording may be up to 10 KB. 1 To begin creating a message: To see the size of a message you are creating: 1 Scroll to any field in the message. 2 Press m. 3 Select Message Size. Sending or Canceling To send the message at any time after it has been addressed: Press A under Send. -orIf Send is not one of your options: Press m. Select Send.
Creating and Sending Messages Tip: To remove a phone number or email address from the list of message recipients: Scroll to phone number or email address you want to remove. Press m. Select Remove. When you are finished addressing the message, press A under Done. 3 To enter or edit the body of the message: With Mesg highlighted, press A under Change. Note: If you have created a signature, the signature automatically appears in this field. Text you enter appears before your signature.
MMS Messages Select recipients from Contacts or the recent calls list. See “More Ways to Address a Message” on page 74. For information on viewing received messages, see “Receiving a Message” and “Viewing Received Messages from the Message Center” on page 77. When you are finished addressing the message, press A under Done.
Creating and Sending Messages 4 A list of words and short phrases is displayed. Select any of these phrases to add it to the body of your messages. -orSelect [Create Reply] to begin the body of your message without using any of these phrases. 5 Edit any message fields you want to change. 6 Send the message. Tip: To create new reply phrases to use in later reply messages, see “Customizing MMS” on page 81. More Ways to Begin a Message 4 Create and send the message.
MMS Messages More Ways to Address a Message When you are filling in the To and Cc message fields, you can select recipients from Contacts and the recent calls list. You can select more than one recipient from Contacts and the recent calls list. A checkmark appears next to each selected item. Tip: To deselect a selected item: Scroll to a selected item. Press A under Deselect. From Contacts When you select recipients from Contacts, Contacts entries containing phone numbers or email addresses are displayed.
Drafts Quick Notes When you are filling in the Mesg and Subject message fields, you can add ready-made words or short phrases called Quick Notes. After you add these words or phrases, you can edit them as you would any other text. 1 With Mesg or Subject highlighted: Press A under QNotes. -orIf QNotes is not one of your options: Press m. Select Quick Notes. 2 Select the Quick Note you want to insert into the message. Tip: To create new Quick Notes to use in later messages, see “Customizing MMS” on page 81.
MMS Messages Drafts Icons # Draft. z High priority. ! Attachment. y High priority with an attachment. Sent Items Messages you have sent or tried to send are stored in Sent Items. Forwarding Sent Items 1 From the main menu, select Messages > Sent Items. 2 Scroll to the message you want to forward. 3 Press m. 4 Select Forward. 5 Create and send your message. Resending If a message was not successfully sent, you can resend it. 1 From the main menu, select Messages > Sent Items.
Receiving a Message Sent Items Icons O Successfully sent. [ Unsuccessfully sent. z High priority. ! Attachment. y High priority with an attachment. Viewing Received Messages from the Message Center 1 From the main menu, select Messages > Inbox. 2 Scroll to the message you want to view. 3 Press A under Read. If you have not viewed the message before, the message is downloaded from the message server. When you receive an MMS message, a message notification appears on the display.
MMS Messages 3 Select Forward. 4 Create and send your message. % Locked, with an attachment. L High priority and locked. y High priority with an attachment. Locking and Unlocking ] High priority and locked, with an attachment. When you lock a message, it cannot be deleted until you unlock it. Actions for Received Messages Deleting 1 Scroll to the message you want to delete. -orView the message you want to delete. 2 Press m. 3 Select Delete Message. 4 Press A under Yes to confirm.
Actions for Received Messages Making a Private Call 1 View the message. 2 Highlight the Private ID you want to call. 3 If the message contains more than one Private ID, scroll to the Private ID you want to call. 4 Press the PTT button. Sending a Call Alert 1 2 3 4 View the message. Press m. Select Alert. If the message contains more than one Private ID, scroll to the Private ID you want to alert. 5 Press the PTT button. Making a Group Call 1 2 3 4 View the message. Press m. Select Talkgroup.
MMS Messages Storing Numbers from the Message If a message you receive contains a phone number, Private ID, or Talkgroup ID, you can store these numbers to Contacts. 1 2 3 4 View the message. Press m. Select Save Number in Message. If the message contains more than one number, scroll to the number you want to store. 5 To store the number as a new entry, select [New Contact]. -orTo store the number to an existing entry, select the entry.
Customizing MMS Playing, Saving, and Deleting Attached Audio Files Playing To play an audio file attached to a message: 1 View the message. 2 Press m. 3 Select Play Audio. Audio files in messages do not play if VibeAll is set to On. Saving To save an attached audio file to the list of ring tones: 1 View the message. 2 Press m. 3 Select Save Audio. Deleting To delete an audio file from a message: 1 2 3 4 View the message. Press m. Select Delete Audio. Press A under Yes to confirm.
MMS Messages 3 Select Setup. Tip: This option is available from many context-sensitive menus when you are using MMS. New Quick Notes and Reply Phrases Creating 1 From the Setup menu, select Quick Notes or Replies. 2 Select [New QNote] or [New Reply]. 3 Entry text from the keypad. 4 When you are finished, press A under Ok. Editing You can edit only Quick Notes and reply phrases you have created. 1 From the Setup menu, select Quick Notes or Replies.
Managing Memory Clean-Up Options • Off — messages are never automatically deleted. • 5 Messages — If you have more than 5 messages, messages are deleted in the order they were received, starting with the oldest, until 5 are left. • 10 Messages — If you have more than 10 messages, messages are deleted in the order they were received, starting with the oldest, until 10 are left. • 1 Day — Messages are deleted if they are older than 1 day. • 3 Days — Messages are deleted if they are older than 3 days.
MMS Messages To view your used memory, free memory, and memory capacity: 1 From the main menu, select Messages. 2 With [Create Mesg] highlighted, press m. 3 Select Setup > Memory Size. Tip: This option is available from many context-sensitive menus when you are using MMS. To free more memory, delete messages. To delete all messages at once, see “Deleting All Messages”. To set messages to be deleted automatically, see “Setting the Clean-up Option” on page 82.
Other Text Messages for Phones with MMS Note: If your text messaging service is not MMS, do not read this section. Read “MOSMS Messages” on page 62 instead.To determine your text messaging service, see “Your Messaging Services” on page 57. If you service provider offers MMS, your phone also receives SMS messages and a receive Net alerts. SMS Messages SMS messages are short text messages. Your phone receives SMS messages, but does not send SMS messages.
Other Text Messages for Phones with MMS If an SMS message you receive contains a phone number, Private ID, or Talkgroup ID, you can call or send a call alert to that number, or store that number to Contacts. Press m while viewing the message to access these options. Net Alerts Note: This feature may not be offered by your service provider. When you receive a browser message, your phone notifies you with a Net alert. Each Net alert lets you view the browser message associated with it.
Java Applications Your phone arrives with Java applications installed and ready to run. You can download and install more Java applications. Note: Using Java applications may cause your phone to use up more battery power than other uses of your phone. Running Applications To run an application that has a shortcut on the main menu: 1 From the main menu, select the application or suite of applications you want to run. 2 If you have selected a suite of applications, select the application you want to run.
Java Applications Ending Applications Installing Applications To end an application: Before running most applications you have downloaded, you must install them. 1 From the main menu, select Java Apps. 2 If the application you want to end is part of a suite of applications, select the suite. 3 Scroll to the application you want to end. 4 Press A under End. 1 From the main menu, select Java Apps. 2 Select the application or suite of applications you want to install.
Managing Memory 6 When your phone has finished deleting the application, press A under Done. To delete all Java applications: 1 2 3 4 5 From the main menu, select Java Apps. Scroll to Java System. Press m. Select Delete All. Press A under Yes to confirm. Managing Memory To view the amount of memory available for Java applications: Shortcuts on the Main Menu When you install an application, you can create a shortcut to the application on the main menu.
Java Applications 2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it. 3 Scroll to the application you want to remove the shortcut for. 4 Press A under OK. 5 Press A under Done. Java Applications and GPS Enabled Some Java applications can make use of your phone’s GPS feature to determine the approximate geographical location of your phone. (See “GPS Enabled” on page 93 for more information on the GPS feature.
Java Applications and GPS Enabled When a Java application requests access to the location of your phone, a screen appears informing you. To deny this request: 1 Press A under Deny. The application does not access the location of your phone. 2 Select the denying option you want: • Always — If the application requests access to the location of your phone again, the request is denied without notifying you.
Java Applications • Always — The application always has permission to access the location of your phone, without notifying you. • Ask — When the application requests access to the location of your phone, you are prompted to grant or deny permission (see “Granting or Denying Permission” on page 90). • Never — When the application requests access to the location of your phone, the request is denied without notifying you.
GPS Enabled Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.
GPS Enabled • When your GPS antenna is covered (for example, by your hand or other object) or facing the ground • In temperature extremes outside the operating limits of your phone Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate.
Viewing Your Approximate Location GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center. In some cases, your local 911 emergency response center may not be equipped to receive GPS location information.
GPS Enabled • The number of satellites used to calculate the location. In general, more satellites make for better accuracy. To calculate your location again: Press A under Rfrsh. It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phone’s display saying your phone is scanning for satellites. For tips on getting the best location calculation, see “Enhancing GPS Performance”.
Enhancing GPS Performance • Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals. • Hold your phone to enhance reception.
GPS Enabled Updating Satellite Almanac Data Another way to keep the GPS feature of your phone working well is to keep your satellite almanac data up to date. The United States government maintains an almanac of data about where GPS satellites are as they orbit the Earth. This information is available to your phone. Keeping your satellite almanac up to date helps your phone determine your location more quickly.
Using GPS with Map Software 3 Scroll to the privacy setting you want. 4 Press A under Select. Setting the GPS PIN Security Feature To prevent your GPS privacy settings from being altered without your knowledge, your GPS privacy option can be protected by a PIN. When you receive your phone, the GPS security feature is turned off, so you do not have to enter a GPS PIN to access your GPS privacy options. If you turn this feature on, you will be required to enter a GPS PIN to access your GPS privacy options.
GPS Enabled See “Enhancing GPS Performance” on page 96 for more details on obtaining good location information. connector cover Note: Because your phone is continuously determining your location, using the GPS feature of your phone with map software uses the phone’s battery power quickly. Software Compatibility Your phone sends location information to your laptop or other device using the standard National Marine Electronics Association (NMEA) format.
Using GPS with Map Software Make sure no other application is using the COM port selected. Make sure the COM port settings of your laptop or other device are set to the following: • • • • • Bits per second: 4800 Data bits: 8 Parity: None Stop bits: 1 Flow control: Hardware To set your phone to send location information to your laptop or other device: 1 From the main menu, select GPS > Interface. 2 With NMEA OUT highlighted, press A under Change. 3 Scroll to On. 4 Press A under Select.
Voice Records Note: This is an optional feature. Contact your service provider about its availability for purchase. A voice record is a recording you make with your phone and can play back. You can record notes to yourself or phone calls. Your phone can store up to 20 voice records. Creating Voice Records To record a note to yourself: 1 From the main menu, select VoiceRecd > [New VoiceRec]. 2 Say the message you want to record into the microphone.
Deleting Voice Records 4 Enter the label you want to assign. See “Entering Text” on page 29. 5 Press A. Deleting Voice Records To delete a voice record: 1 From the main menu, select VoiceRecord. 2 Scroll to the unlocked voice record you want to delete. 3 Press m. 4 Select Delete. 5 Press A under Yes to confirm. To delete all voice records: 1 2 3 4 5 From the main menu, select VoiceRecord. Scroll to any voice record. Press m. Select Delete All. Press A under Yes to confirm.
Voice Records Note: Voice records are stored in your phone using the same memory space used to store messages, Java application data, and ring tones. Deleting some of these other items frees memory space for voice records.
Customizing Your Phone volume of the phone’s ring when you get a call on that line. Setting the Volume See “Volume Features” on page 107. To set the volume of the sound coming from the phone’s earpiece or speaker: Setting Your Phone to Not Ring 1 From the main menu, select Settings > Volume. 2 Scroll to Earpiece to set the earpiece volume. -orScroll to Speaker to set the speaker volume. 3 Press A under Change. 4 To select the volume: Scroll left or right. -orPress the volume controls.
Customizing Your Phone If your phone does not include a vibrate feature, you can still set your phone to make no sound. Scroll to Silent in step 3. Seeing the Display Better To set the contrast of the display: 1 From the main menu, select Settings > Display/Info > Contrast. 2 Press A under Change. 3 Scroll left or right to set the contrast. 4 Press A under Ok. Using Settings Settings contains many submenus that let you customize your phone.
Using Settings • TTY — lets you use your phone with a TTY device. See “Making TTY Calls” on page 41. • Notifications — See “Setting Notification Options” on page 59. 2-Way Radio Features The 2-Way Radio menu controls how your phone handles Private calls and group calls: • Tkgrp Silent — controls whether you hear group calls to your Talkgroup. See “Receiving Group Calls” on page 39. • Tkgrp Area — lets you define your Talkgroup area. • One Touch PTT — See “Setting One Touch PTT” on page 37.
Customizing Your Phone • GPS PIN — enables and disables your phone’s GPS PIN security feature. See “Setting the GPS PIN Security Feature” on page 99. • Change Passwords — changes your phone unlock code, security code, SIM PIN, and GPS PIN. Advanced Features The Advanced menu contains advanced and rarely used Settings features. • Alert Timeout — controls the amount of time a tone continues to sound when you receive a message notification or call alert. • Headset/Spker — sets headset option.
Profiles Viewing Profiles A profile is a group of settings saved together so that you can apply them to your phone easily. To view the profiles stored in your phone: A profile contains these settings: • Ring Tones — sets all options described in “Ring Tones” on page 44, except assigning ring tones to Contacts. • Display/Info — sets Color Palette, Text Size, and Backlight options. See “Display/Info Features” on page 106. • Phone Calls — sets Set Line and Auto Ans options.
Profiles Note: Earbuds and headsets are sold separately. To order accessories, log on to our Web site at www.motorola.com/store/iden or contact your Motorola Authorized Retailer. How Changing Settings Affects Profiles Many of the settings contained in profiles can be set without switching or editing profiles — for example, by selecting Settings or Ring Tones to set options, or by setting the volume of the phone’s ring using the volume controls.
Creating Profiles A temporary profile is automatically given the same name as the profile it is based on, but with an asterisk (*) in front of it. When you view a temporary profile’s settings, the options that differ from the profile it is based on have an asterisk in front of them. Storing a Temporary Profile To store a temporary profile as a new profile: 1 2 3 4 5 From the main menu, select Profiles. Scroll to the temporary profile. Press m. Select Store As New.
Profiles 3 Press m. 4 Select Edit. 5 Follow the applicable instructions in “Creating Profiles” to edit the various fields. Note: You cannot edit the Surveillance profile. Setting Call Filtering Deleting Profiles To set call filtering: To delete a profile: 1 From the main menu, select Profiles. 2 Select the profile you want to delete. Note: A temporary profile is automatically deleted when the profile it is based on is deleted. 3 Press m. 4 Select Delete. 5 Press A under Yes to confirm.
Setting Call Filtering • Off sets your phone to notify you of all Private calls and group calls. • On sets your phone to ignore all Private calls and group calls. 5 To set filtering options for call alerts, select Alerts. • Off sets your phone to notify you of all call alerts. • On sets your phone to ignore all call alerts. 6 To set filtering options for message notifications, select Notifications. • Off sets your phone to notify you of all messages.
Shortcuts Shortcuts lets you access most menu options by pressing a number on your keypad or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time. Creating a Shortcut 1 Go to the menu item you want to create a shortcut for. For example, if you want to create a shortcut to the screen for creating a new Contacts entry: From the main menu, select Contacts, then highlight [New Contact]. 2 Press and hold m until a confirmation screen appears.
Deleting Shortcuts 6 Scroll to the place where you want the shortcut to appear. 7 Press A under Insert. 8 Repeat step 4 through step 7 for all the items you want to move. 9 Press A under Done. To change the number or voice name assigned to a shortcut: 1 From the main menu, select Shortcuts. 2 Highlight any shortcut. 3 Press A under Edit. Deleting Shortcuts To delete a shortcut: 1 2 3 4 5 From the main menu, select Shortcuts. Scroll to the shortcut you want to delete. Press m. Select Delete.
Using a Headset If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time: 1 From the main menu, select Settings > Advanced > Headset/Spkr. 2 Press A under Change. 3 Scroll to HdsetOnly to send incoming sound to the headset only. -orScroll to Hdset&Spkr to send incoming sound to the headset and the speaker at the same time. 4 Press A under Select.
Understanding Status Messages Status Messages Message Description System Busy The system is experiencing heavy traffic. Please try again later. You may receive status messages under certain conditions. Before contacting Customer Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages. Please Try Again An error occurred. Please try again.
Understanding Status Messages Status Messages Message Description Enter SIM PIN Please enter your 4- to 8- digit SIM PIN code. Enter Unlock Code Auto Phone Lock is activated. Enter you unlock code. New Browser Message Memory Full! Warns of low memory for Net Alerts. Scanning for Satellites Searching for GPS satellites. Unable to Locate Sats Could not find GPS satellites. Technical Error A problem occurred in your phone’s GPS circuitry.
Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE PORTABLE RADIO. RF Operational Characteristics Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.
Safety and General Information • ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) “additional requirements for SMR, cellular and PCS product certification.” To assure optimal radio product performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures: Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone.
Portable Radio Product Operation and EME Exposure Approved Accessories For a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.motorola.com/iden. ALL MODELS WITH FCC ID AZ489FT5831 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S.
Safety and General Information 2 The SAR information reported to the FCC includes the FCC-accepted Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. Electro Magnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility.
Operational Warnings Other Medical Devices Operational Warnings If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. For Vehicles with an Air Bag ! Check the laws and regulations on the use of radio products in the area where you drive. Always obey them.
Safety and General Information as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.
Accessory Safety Information Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product. Accessory Safety Information Important: Save these accessory safety instructions.
Safety and General Information • The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet. • Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician. • Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
MOTOROLA LIMITED WARRANTY Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE PURCHASED IN THE UNITED STATES OR CANADA PRODUCTS COVERED LENGTH OF COVERAGE Products as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. Accessories as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc.
MOTOROLA LIMITED WARRANTY What is not covered? (Exclusions) Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse.
Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided "as is" and without warranty. Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty.
MOTOROLA LIMITED WARRANTY PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Limited Warranty Motorola Communication Products (International) Note: This Warranty applies in Singapore and the Philippines. I.
Limited Warranty Motorola Communication Products (International) MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty.
b. Defects or damage from misuse, accident, water, or neglect. c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. d. Breakage or damage to antennas unless caused directly by defects in material workmanship. e. A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment). f.
Limited Warranty Motorola Communication Products (International) settlement or compromise; and c.
Patent and Trademark Information MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2004 Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation. T9 is a trademark owned by Tegic Communications. T9® Text Input Patent and Trademark Information copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software.
Index Numerics 2-way radio 107 see also Private calls, group calls, and call alerts 3-way calling 36 A Accessories 15 safety 125 Alpha mode 48 B Backlight 106 Battery 2 care 5 charging 3, 4 door 2 inserting 3 safety 124 Baud rate 108 C Call alerts 21 deleting 22 136 queue 21 receiving 21 responding 21, 22 sending 21 sorting 22 viewing 21 Call forwarding all calls 32 missed calls 33 off 33 Call Hold 36 Call Timers 39 Call Waiting 35 off 35 Calls 3-way 36 answering automatically 106 answering with any key
creating MMS messages 73 deleting 29 editing entries 28 icons 25 International numbers 30 searching 26 showing all entries 27 showing only Private IDs 27 SIM card 25 storing fast 28 storing from idle screen 29 storing from Memo 29, 43 storing from MMS messages 79 storing from recent calls 23, 28 storing from SMS messages 86 type 23, 25 viewing 26 with non-i325 phones 31 D Display backlight 106 contrast 106 options 8 screen 7 Drafts 68, 75 see also MMS messages, drafts icons 76 GPS PIN 108 GPS, see GPS En
Index Inbox 68, 77 icons 77 International numbers 37 calling 37 storing 30 J Java applications deleting 88 memory 89, 104 K Keypad 1 locking 14, 107 L Language 106 Lists, see menus Locating Your SIM Card 2 M Memo 43 calling from 43 creating 43 editing 43 storing to Contacts 29, 43 viewing 43 138 Memory Java applications 89, 104 MMS messages 83 MOSMS messages 67 ring tones 46 voice records 103 Menu key 1, 8 Menus 8 context-sensitive 1, 8 main menu 8 Message center 57, 59, 61 see also messages for MMS 57
outbox 65 quick notes 65 receiving 62 sending 63 sent messages 66 setting up 62 Mute 20 N Navigation key 1 Net alerts 86 Numeric mode 50 O Over-the-air programming 6 P Packet data 40 Passwords 108 Patent information 135 Pauses dialing 37 storing 30 Phone 1, 7 active line 106 locking 107 modem 40 off 5 on 5 setting up 2 Programming, over-the-air 6 PTT One Touch 19 One Touch, setting 37 PUK code 12 Q Quick notes 75, 82 see also MMS messages, Quick notes R Radio frequency 119 Recent calls 17, 23 addressi
Index Security 107 Send key 1 Sent items 68, 76 see also MMS messages, sent items icons 77 Service, activating 5 Settings 106 resetting 108 SIM card 11, 13 Contacts 25 inserting 13 removing 14 with non-i325 phones 31 SIM PIN 11, 107 changing 11 default 11 entering 11 requirement 12 unblocking 12 SMS messages 62, 85 also see MOSMS messages 62 calling from 85 message center 85 140 receiving 85 storing to Contacts 86 Speakerphone 19 Speed Dial 19, 26, 28 Status messages 117 Symbols mode 50 T T9 Text Input, s
Driving Safety Tips “Safety is your most important call!” Your Motorola wireless telephone gives you the powerful ability to communicate by voice — almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies that benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility.
Driving Safety Tips • Your phone can perform many other functions besides allowing you to make and receive calls. Do not let these features distract you from driving. Use them only when it is safe to do so. • Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. • Use your wireless phone to help others in emergencies.
