User Manual

Table Of Contents
62
GPS Enabled
Getting Started
To connect your phone to your laptop or other device:
1 Open the connector cover.
2 With the phone’s display facing up, insert the data
cable’s connector into the accessory connector,
until you hear a click.
3 Insert the data plug into the COM port of your
laptop or other device.
Make sure no other application is using the COM port
selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
Bits per second: 4800
Data bits: 8
Parity: None
Stop bits: 1
Flow control: Hardware
To set your phone to send location information to
your laptop or other device:
1 From the main menu, select GPS > Interface.
2 With NMEA OUT highlighted, press A under
Change.
3 Scroll to On.
4 Press A under Select. Your phone is now sending
location data to your laptop or other device.
To stop your phone from sending location data to
your laptop or other device:
Set NMEA OUT to Off.
Each time you power your phone on, NMEA OUT is
automatically set to Off.
connector
cover