User's Manual

6
Getting Started
As your phone connects to the network, you will see
a welcome message and a connecting message.
When the idle screen appears, the phone is ready to
use.
To power your phone off:
1 Press and hold p.
2 Push down the antenna.
If you are set up to receive over-the-air
programming from your service provider, you must
enable security the first time you power on your
phone or within 20 days of first activation of your
phone:
1 When you power on your phone for the first time,
after the idle screen appears, you will be
prompted to select Ok to update your browser
information.
Note: If you press A under Later, you will be
prompted to enable security each time you
power on your phone until you press A
under Ok.
2 Press A under Ok.
3 You are prompted to enable security. Press A
under Yes. A series of screens appears. If you
subscribe to your service provider’s plan, your
home page appears.
4 Press e to return to the idle screen.
Within 24 hours of enabling security, you will receive
a Net alert containing your Private ID and Talkgroup
lists for Private calls.
To accept programming:
1 When you receive a Net alert saying New
Browser Message - Receive Programming
Info, press A under Goto.
2 You are prompted to accept changes to your lists.
Press A under Ok.
3 If you are prompted again to accept changes to
your lists, press A under Ok.
4 A confirmation screen displays. Press A under
Ok.
5 Press e to return to the idle screen.
MesgContcs
s
d1
S