User's Manual

40
Selecting a Status Message Using Memory Scroll
You can select Status Messages by using the or keys to scroll through
the ten named (aliased) Status Messages which you have programmed.
1. Press the until you find the message you want.
In this case we scrolled to the Status Message “At
Lunch”.
2. Press “Ok”.
3. Press “Targt” to select a target for this message.
Selecting a Target by Direct Entry
1. Enter the numeric ID of the person to whom you
are sending the message.
2. Press “Ok”.
3. Press the PTT button to send the message to the
selected ID.
Selecting a Target by Memory Scroll
You can select a target by scrolling though the portable IDs or aliases by using
the
or keys.
1. Press the
or key until you find the person
to whom you want to send the message.
2. Press “Ok”.
3. Press the PTT button. The display shows the mes-
sage that has been sent.
Selecting a Target by Alpha Search
You can select a portable ID by selecting the first letter of the name (alias). If no
name is stored under a letter, the unit will automatically search forward,
alphabetically, until the next name is found.
1. Press the “Name” key.
2. Press a numeric key. i.e.: Press
three times to
view the names (aliases) that begin with the letter
R.
3. Use either the
or keys to scroll to the name
(alias) who is to receive the Status Message.
4. Press the PTT button. The display shows the message that has been sent.
Sts Message
At Lunch
Cancl
Ok
Sts Target
5= Rochelle
Cancl
Ok
Sts Target
Julie
Cancl
Ok
Name:Sts
R=Randy
Cancl
Ok
7