User's Manual

36
Fred has released his PTT button, then begins to receive
Julie’s response.
Jason receives Julies’s response.
After the Secondary Talkgroup call is completed, all
receiving subscriber units’ displays will revert to their
Primary Talkgroup of the selected Talkgroup Mode.
Turning Scan On and Off
The capability to turn scan on and off is available as an option key.
1. Press the “Scan” option key.
Press the “S Off” soft option key to disable scan.
When Scan is disabled, you will not have access to your Secondary Talkgroups
Aliasing Talkgroup Mode
The r 750 plus phone allows you to Alias Talkgroup Modes and Primary and
Secondary Talkgroups.
1. Press ,
,
.
2. Select “Ok”.
3. At “Add New Entry” select “Ok”.
NOTE: Press
or
to Edit or Erase a Talkgroup Mode Alias.
4. Enter the ID of the desired talkgroup mode and press “Store”.
NOTE: The Aliased Modes are displayed only while scrolling through the Talk-
group Mode or during Direct Entry. In an idle or transmission state,
the Mode ID number is displayed. This ensures that the Mode ID num-
ber and Primary Talkgroup are displayed simultaneously on screen.
5. Then enter the name of the desired talkgroup mode alias and press “Store”.
Group Ready
3:Electricia
Fred’s Display
S.Off
Sts
Group Ready
3:Tg 3
Jason’s Display
S.Off Sts
Group Ready Group Ready
3:Electricia
Scan Disabled
Group Ready
18-Engineers
Group Ready
18:Engineers
Scan Enabled
S.Off
Sts
S.Off
Sts
2
5