User's Manual

Making Private Calls
31
Quickstore of Private IDs
Quickstore allows you to quickly store a received or sent Private ID, without
having to enter the programming menu.
From the Private Ready screen, with the Private ID
displayed:
1. Select “Store”.
If an ID is greater than 12 characters in length, the ID
wraps to the third line.
2. Enter the name associated
with the Private ID.
3. Select “Store”. The Stored message displays.
If the list is full with the maximum 100 entries, you
will get the message, “Prvt List Full”. You cannot
add names until you remove som e names from the list.
4. Next, the display returns to the Private Ready mode.
Storing Your Private ID
NOTE: For non-Crossfleet enabled networks only.
To store your Private ID in your r 750 plus phone:
1. Press
,
,
.
The screen displays the message, “2=Own Pvt
ID”.
2. Select “Ok”.
3. Enter the Private ID provided by your carrier.
4. Select “Store”.
To view your Private ID at any time after you store it:
1. Press ,
,
. The screen displays the message, “2=Own Pvt
ID”. The next line displays your Private ID. This is the number supplied by
your carrier that you store in your phone.
2. Select “Exit”.
1
Prvt Ready
56781
12:43p 07/22
Alert
Store
1
Enter Name
-
Cancl
Store
1
JOHN
Stored
1
Prvt Ready
JOHN
12:43p 07/22
Alert
Name
2
2
Name