User's Manual
Table Of Contents
- Contents
- Safety and General Information
- General Radio Operation
- Notations Used in This Manual
- Your XTS 5000 Model III Radio
- Physical Features of the XTS 5000 Model III Radio
- Programmable Controls
- Display
- Keypad
- LED Indicators
- Alert Tones
- Standard Accessories
- Radio On and Off
- Zones and Channels
- Receive / Transmit
- Common Radio Features
- Selectable Power Level
- Radio Lock
- Mute or Unmute Keypad Tones
- Conventional Squelch Operation
- PL Defeat
- Time-out Timer
- Emergency
- Lists
- Scan
- Individual Calls
- Status Calls (Trunked Radios Only)
- Repeater or Direct Operation
- Smart PTT (Conventional Only)
- Special Radio Features
- Helpful Tips
- Accessories
- Glossary
- Commercial Warranty
- Index
ASTRO Digital XTS 5000 Model III 39
Common Radio Features
Send a Silent Emergency Alarm
Note: For ALL Emergency signals:
• If the new channel is also programmed for Emergency, you can
change channels while in Emergency operation. The
emergency alarm or call continues on the new channel.
• If the new channel is NOT programmed for Emergency, you
hear an invalid tone until you exit the Emergency state or
change to a channel programmed for emergency.
Emergency Keep-Alive
With Emergency Keep-Alive enabled, if the radio is in the Emergency
state, you cannot turn off the radio by using the On/Off Volume
Control knob.
1 With your radio turned on,
press the Emergency
button. The display does not
change, the LED does not
light, and you hear no tones.
• Display does not change
• LED does not light
• No tones
Note: To exit emergency at any time, press and hold the
Emergency button.
2 The silent emergency state
continues until you:
Press and hold the Emer-
gency button to exit the
emergency state.
OR
Press and release the PTT
button to exit silent emer-
gency and enter regular
emergency (alarm, call, or
alarm with call).
• Press and hold Emergency
button
OR
• Press and release the PTT
button
95C08-O_XTS5k_800MHz_Mdl3.book Page 39 Thursday, August 23, 2001 2:52 PM