User's Manual
Table Of Contents
- Contents
- Safety and General Information
- General Radio Operation
- Notations Used in This Manual
- Your XTS 5000 Model III Radio
- Physical Features of the XTS 5000 Model III Radio
- Programmable Controls
- Display
- Keypad
- LED Indicators
- Alert Tones
- Standard Accessories
- Radio On and Off
- Zones and Channels
- Receive / Transmit
- Common Radio Features
- Selectable Power Level
- Radio Lock
- Mute or Unmute Keypad Tones
- Conventional Squelch Operation
- PL Defeat
- Time-out Timer
- Emergency
- Lists
- Scan
- Individual Calls
- Status Calls (Trunked Radios Only)
- Repeater or Direct Operation
- Smart PTT (Conventional Only)
- Special Radio Features
- Helpful Tips
- Accessories
- Glossary
- Commercial Warranty
- Index
26
General Radio Operation
Use the Preprogrammed Monitor Button
Conventional Mode Operation
Your radio may be programmed to receive Private-Line® (PL) calls.
5 Press and hold the PTT
button to transmit. The LED
lights RED while
transmitting.
6 Release the PTT button to
receive (listen).
1 Turn the radio on and select
the desired zone and
channel.
2 Press the Monitor button
and listen for activity. (See
the following Conventional
Mode Operation.)
3 Adjust the Volume Control
knob if necessary.
4 Press and hold the PTT
button to transmit. The LED
lights RED while
transmitting.
5 Release the PTT button to
receive (listen).
1 Momentarily press the
Monitor button to listen for
activity. The Carrier Squelch
indicator is displayed.
C
A
djust
L
evel
C
95C08-O_XTS5k_800MHz_Mdl3.book Page 26 Thursday, August 23, 2001 2:52 PM