User's Manual
Table Of Contents
- Contents
- Safety and General Information
- General Radio Operation
- Notations Used in This Manual
- Your XTS 5000 Model III Radio
- Physical Features of the XTS 5000 Model III Radio
- Programmable Controls
- Display
- Keypad
- LED Indicators
- Alert Tones
- Standard Accessories
- Radio On and Off
- Zones and Channels
- Receive / Transmit
- Common Radio Features
- Selectable Power Level
- Radio Lock
- Mute or Unmute Keypad Tones
- Conventional Squelch Operation
- PL Defeat
- Time-out Timer
- Emergency
- Lists
- Scan
- Individual Calls
- Status Calls (Trunked Radios Only)
- Repeater or Direct Operation
- Smart PTT (Conventional Only)
- Special Radio Features
- Helpful Tips
- Accessories
- Glossary
- Commercial Warranty
- Index
ASTRO Digital XTS 5000 Model III 113
Index
R
radio
care
cleaning ...............................88
handling ...............................88
things to avoid ......................87
lock
change your password .........31
unlock your radio .................30
on and off ................................21
receive / transmit
use preprogrammed monitor
button .....................................26
use preprogrammed volume set
button .....................................25
without using volume set and
monitor buttons ......................25
remove
the antenna .............................17
the battery ...............................15
the belt clip ..............................18
the universal connector cover ....19
repeater or direct operation .........71
reprogram request ......................77
use the preprogrammed reprogram
request button ........................78
request a new dynamic regrouping
using the menu ........................77
S
safety and general information .... vii
scan
delete a nuisance channel ......55
types of scan lists ....................53
types of scanning ....................53
scan (conventional only)
make a dynamic priority
change ...................................56
secure operations .......................75
secure or clear transmissions .....75
select
a channel
method 1 use the 16-position
select knob ..........................23
method 2 use the menu ....... 23
a phone number
use the keypad ....................58
use the menu ....................... 58
a zone
use the menu ....................... 22
use the preprogrammed
zone switch .......................... 22
an ID number for call alert page
use the keypad ....................65
use the menu ....................... 65
an ID number for private call
use the keypad ....................62
use the menu ....................... 62
clear transmissions .................75
enable / disable ....................... 79
repeater or direct operation
use the menu ....................... 71
use the preprogrammed
repeater/direct switch ..........72
secure transmissions ..............75
selectable power level
use the menu ..........................29
use the preprogrammed transmit
power level switch ................. 29
send
a call alert page
use the PTT button .............. 66
usinehe preprogrammed quick
access call alert button ........ 66
a status call
use the menu ....................... 69
use the preprogrammed status
button ..................................70
service ........................................89
95C08-O_XTS5k_800MHz_Mdl3.book Page 113 Thursday, August 23, 2001 2:52 PM