User's Manual

62
Common Radio Features
Scan
The scan feature allows you to monitor traffic on different channels by
scanning a preprogrammed list of channels. There is one list per
radio. The list must be preprogrammed by a qualified technician.
There are two types of available scan lists:
• Conventional includes only conventional channels. A maximum
of 10 different channels is possible.
• Talkgroup Scan includes conventional and trunked channels on
one trunking system. A maximum of ten different channels is
possible. Priority operation is not available in this type of list.
• You can view the scan list assigned to the currently selected
channel the same way you would view other lists. See “Viewing a
List” on page 54.
Turn Scan On and Off
Using the Menu
1 Press U to find 6&$1.
2 Press D, E, or F
directly below 6&$1.
The current scan state is
displayed.
3 Press D, E, or F
directly below 21 or 2)).
When scan is on, the scan
status symbol (T) is
displayed.
6&$1
6&$12))
21 2))
T
6&$1
21 2))