User's Manual
Table Of Contents
- Front Cover
- Inside Front Cover
- Quick Reference Card
- Contents
- Safety and General Information
- General Radio Operation
- Notations Used in This Manual
- XTS 2500 Model III Radio
- Physical Features of the Radio
- Programmable Features
- Display
- Backlight
- Status Symbols
- Menu Entry (Softkey)
- Menu Select Buttons
- Home Button (h)
- W@P™ Button
- 4-Way Navigation Button (o)
- Keypad
- LED Indicators
- Alert Tones
- Standard Accessories
- Remove the Belt Clip
- Universal Connector Cover
- Remote Speaker Microphone Adapter
- Radio On and Off
- Zones and Channels
- Receive / Transmit
- Common Radio Features
- Selectable Power Level
- Radio Lock
- Mute or Unmute Keypad Tones
- Conventional Squelch Options
- PL Defeat
- Time-out Timer
- Emergency
- Lists
- Edit a Call, Page, or Phone List Number
- Scan
- Individual Calls
- Conventional Talkgroup Calls (Conventional Operation Only)
- Status Calls (Trunked Radios Only)
- Repeater or Direct Operation
- Special Radio Features
- Helpful Tips
- Accessories
- Glossary
- Commercial Warranty
- Index
30
General Radio Operation
Remote Speaker Microphone Adapter
The Remote Speaker Microphone (RSM) adapter is located on the
back of the radio, just above the battery. It must be used to connect
the RSM accessories (see page 53) to the radio.
Remove the Adapter
Attach the Adapter
Lift the larger side (below the
antenna port) of the adapter
away from the radio using your
finger.
If you cannot easily remove the
adapter with your finger, use a
small, flat blade screwdriver to
pry the larger end side of the
adapter away from the radio.
1 With the Motorola side of the
adapter facing out, snap the
smaller end of the adapter
into place in the shroud
indent, below the On/Off
Volume Control Knob.