User's Manual
Table Of Contents
- Contents
- Safety
- Radio Overview
- Getting Started
- Battery Information
- Accessory Information
- Turning Radio On or Off
- Adjusting the Volume
- Selecting a Mode
- Sending a Trunked Call
- Sending a Conventional Call
- Receiving a Trunked or Conventional Call
- Failsoft Operation (Trunked Systems Only)
- Coded Squelch Operation (Conventional Channels Only)
- Smart PTT (Conventional Operation Only)
- Radio Calls (Trunked Operation Only)
- Scan
- Warranty
- Accessories
35
English
SCAN
SCAN
SCAN OPERATION
The scan feature allows you to monitor activity
on different conventional or trunked modes by
scanning a
scan list
of modes. This list can be
programmed by your Motorola authorized
dealer.
The table below lists the types of scan
operations available.
Automatic scanning (autoscan) can be
programmed by your authorized Motorola
dealer. If autoscan is enabled for a mode, your
radio begins scanning using the mode’s scan
list whenever you select that mode. The radio
will continue autoscanning until you select a
mode that does not have autoscan enabled.
Deleting Nuisance Modes
When the radio scans to a mode you do not wish
to monitor (nuisance mode), you can temporarily
delete that mode from the scan list.
Conventional
Scan
(autoscan
only)
Comprises conventional only
modes.
Talkgroup
Scan
(autoscan
only)
Comprises conventional modes
and trunked modes from more
than one trunking system.
1
When your radio is locked on the mode to
be deleted, press the nuisance-mode delete
button (programmable by your authorized
Motorola dealer).
2
A valid-keypress chirp is heard, indicating
that the mode has been deleted.
3
The radio continues scanning the remaining
modes in the list.
4
To resume scanning the deleted mode, you
must leave and reenter scan operation.