User's Manual
Table Of Contents
- Contents
- Safety
- Radio Overview
- Getting Started
- Battery Information
- Accessory Information
- Turning Radio On or Off
- Adjusting the Volume
- Selecting a Mode
- Sending a Trunked Call
- Sending a Conventional Call
- Receiving a Trunked or Conventional Call
- Failsoft Operation (Trunked Systems Only)
- Coded Squelch Operation (Conventional Channels Only)
- Smart PTT (Conventional Operation Only)
- Radio Calls (Trunked Operation Only)
- Scan
- Warranty
- Accessories
16
English
RADIO OVERVIEW
On/Off/Volume Knob
Turns the radio on or off, and adjusts the
radio’s volume.
Mode Selector Knob
Selects the required operation mode.
Push-to-Talk (PTT) Button
Press and hold down this button to talk;
release to listen.
LED Indicator
Indicates status of operating conditions (see
table below).
Microphone
When sending a message, hold the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth, and speak clearly into the
microphone.
With PTT button pressed (radio transmitting)
Steady red
Radio is transmitting (
PTT
button
pressed)
LED unlit Radio is not transmitting
Flashing red
Low battery (conventional mode
only; programmable by your
authorized Motorola dealer)
Momentary
green
Radio has powered-up success-
fully
With PTT Released (radio receiving)
Blinking red light Mode busy (conventional
mode only)
Blinking green
light
Receipt of a telephone call,
Private Conversation call, or
Call Alert page