User's Manual

44
English
TRUNKED FEATURES
Note: The last member of the list is also the “last
ID transmitted or received” at position “00”
on the list.
• If you enter a location number that does
not exist (for example, “15”), the display will
show “INVALID ENTRY,” and the radio will
sound an invalid-keypress tone and return
back to step 4b of this procedure.
Sending the Radio ID Number
Note: If the radio you are calling is not in service,
you will not hear the ringing and the display
will show “NO ACKNOWLELDGE”. Go to
step 10 to hang up.
• If your radio is configured for Private Call II,
you will not hear the telephone type ring-
ing. Instead you are able to proceed to talk
to the Called party.
4c
If there are 10 or more members in the list,
the display shows “ID LOC#X_” (where X is
the first digit). The cursor blinks to show the
location of the second digit.
4d
Enter the second digit of the location number.
4e
The radio goes to that
position in the list. The
display alternates
between showing the
member’s name and ID
number.
Alternates
between
and
GILBERTO
ID: 784116
5
Press the PTT button to transmit the ID num-
ber.
6
If the radio you are calling is on the air, you
will hear a telephone-type ringing for 20 sec-
onds, or until the called radio answers the call.
7
If the party you are call-
ing does not answer the
call within twenty sec-
onds, the telephone
ringing stops and an
alert tone sounds.
At this point you can either send a Call Alert™
page, or go to step 10 to hang up.
8
If the party you are calling answers the call,
you will hear his/her voice.
NO ANSWER