User's Manual

43
English
TRUNKED FEATURES
Making a Private Call
There are four phases in making a private call,
namely:
• initiating a private call,
• entering the desired radio ID number,
• sending the radio ID number, and
• having the conversation and hanging-up.
Initiating a Private Call
Entering the Desired Radio ID Number
If the last ID number called is the desired
number, go directly to step 5.
To enter a new number
Note: Exactly six digits must be entered for the
radio ID number. If fewer than six digits
were entered, you will hear a bad-keypress
tone and the display will show “INVALID
ENTRY” when attempting to send the radio
ID number. A bad-keypress tone will also
be heard if you try to enter a seventh digit.
• Once you have started entering numbers, the
, key functions as a backspace key. Press-
ing it causes the last digit entered to be erased,
and the cursor moves to the left. When the last
digit is erased, an additional press of this key
causes the last member of the preprogrammed
call list to be displayed; pressing / shows the
first member of the list.
To enter a number from a location in the call list
1
/ until CALL is dis-
played.
2
l (the softkey below
CALL ).
3 The display shows the
last ID number transmit-
ted or received.
4a
Enter the new six-digit ID number using the
keypad.
ZONE MUTE CALL
ID: 722588
4b
On the display, the old ID number disappears
and the new digits appear as they are being
entered.
4c
The cursor flashes indicating the location of
the next number to be entered
4a
, or / to enter the call list.
4b
Enter the first digit of the location number. If
there are fewer than 10 members in the list,
go directly to step 4e.