User's Manual

38
English
SCAN
Note: The scan status annunciator, G, is dis-
played when the scan operation is active. It
will be removed from the display when the
scan operation is terminated.
Deleting Nuisance Modes
When the radio scans to a mode you do not wish to
monitor (nuisance mode), you can temporarily delete
that mode from the scan list.
Viewing a Scan List
The view scan list feature allows you to view the
members of the scan list associated with the currently
selected mode.
To view a scan list
3
Press the softkey
below the desired
scan state (on or off).
The radio returns to
the home display.
1
When your radio is locked on the mode to
be deleted, press the nuisance-mode delete
button (programmed via the CPS).
2
A valid-keypress chirp is heard, indicating
that the mode has been deleted.
3
The radio continues scanning the remaining
modes in the list.
4
To resume scanning the deleted mode, you
must leave and reenter scan operation.
PLANT POLICE
1
/ until VIEW is
displayed.
2
l (the softkey
below VIEW ).
3
; (the softkey
below
SCAN ). The
display shows the
first member of the
scan list.
For example
4
Every subsequent press of / will scroll
through subsequent members of the scan
list.
5
To leave the scan list feature, press the
HOME key, or the PTT button, or turn the
mode selector knob.
6
The radio returns to
the home display.
PAGE STS VIEW
PHON SCAN CALL
FIRE DEP
PLANT POLICE