Users Manual
Table Of Contents
- Other Systems
- 7.1 Push-To-Talk Button
- 7.2 Programmable Buttons
- 7.3 Status Indicators
- 7.4 Zone and Channel Selections
- 7.5 Calls
- 7.6 Advanced Features
- 7.6.1 Bluetooth®
- 7.6.2 Multi-Site Control
- 7.6.3 Talkaround
- 7.6.4 Monitor Feature
- 7.6.5 Home Channel Reminder
- 7.6.6 Remote Monitor
- 7.6.7 Scan Lists
- 7.6.8 Scan
- 7.6.9 Vote Scan
- 7.6.10 Call Indicator Settings
- 7.6.11 Call Alert Operation
- 7.6.12 Mute Mode
- 7.6.13 Emergency Operation
- 7.6.13.1 Sending Emergency Alarms
- 7.6.13.2 Sending Emergency Alarms with Call
- 7.6.13.3 Emergency Alarms with Voice to Follow
- 7.6.13.4 Sending Emergency Alarms with Voice to Follow
- 7.6.13.5 Receiving Emergency Alarms
- 7.6.13.6 Exiting Emergency Mode After Receiving the Emergency Alarm
- 7.6.13.7 Reinitiating Emergency Mode
- 7.6.13.8 Exiting Emergency Mode
- 7.6.14 Man Down
- 7.6.15 Text Messaging
- 7.6.16 Privacy
- 7.6.17 Lone Worker
- 7.6.18 Password Lock
- 7.6.19 Auto-Range Transponder System
- 7.6.20 Over-the-Air Programming
- 7.6.21 Wi-Fi Operation
- 7.7 Utilities
- 7.7.1 Checking Battery Strength
- 7.7.2 Flexible Receive List
- 7.7.3 Text-to-Speech
- 7.7.4 Turning Acoustic Feedback Suppressor On or Off
- 7.7.5 Turning Global Navigation Satellite System On or Off
- 7.7.6 Turning Radio Tones/Alerts On or Off
- 7.7.7 Power Levels
- 7.7.8 Voice Operating Transmission
- 7.7.9 Turning Option Board On or Off
- 7.7.10 Turning Voice Announcement On or Off
- 7.7.11 Switching Audio Route between Internal Radio Speaker and Wired Accessory
- 7.7.12 Turning Intelligent Audio On or Off
- 7.7.13 Turning Trill Enhancement On or Off
- Authorized Accessories List
- Maritime Radio Use in the VHF Frequency Range
- Batteries and Chargers Warranty
- Limited Warranty
Follow the procedure to send Emergency Alarms with call
on your radio.
1 Press the programmed Emergency On button.
The green LED lights up.
NOTE:
If programmed, the Emergency Search tone
sounds. This tone is muted when the
radio transmits or receives voice, and stops
when the radio exits Emergency mode. The
Emergency Search tone can be programmed
by your dealer or system administrator.
2 Wait for acknowledgment.
If successful:
• The Emergency tone sounds.
• The red LED blinks.
3 Press the PTT button to make the call.
The green LED lights up.
4 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
5 Release the PTT button to listen.
6
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the PTT
button to respond to the call.
7 To exit the Emergency mode once the call ends,
press the Emergency Off button.
7.6.13.3
Emergency Alarms with Voice to
Follow
This feature allows you to send an Emergency Alarm with
Voice to Follow to a group of radios. Your radio microphone
is automatically activated, allowing you to communicate
with the group of radios without pressing the PTT button.
This activated microphone state is also known as hot mic.
English
165