Users Manual

whether Scan Talkback was enabled or disabled during
radio programming.
Scan Talkback Disabled
The radio leaves the scanned call and attempts to
transmit on the contact for the currently selected
channel position. After the Call Hang Time on the
currently selected contact expires, the radio returns
to the home channel and starts the Scan Hang Time
Timer. The radio resumes group scan after its Scan
Hang Time Timer expires.
Scan Talkback Enabled
If the PTT button is pressed during the Group Hang
Time of the scanned call, the radio attempts to transmit
to the scanned group.
NOTE:
For Capacity Max, if you scan into a call for a group
that is not assigned to a channel position in the
currently selected zone and the call ends, switch
to the proper zone and then select the channel
position of the group to talk back to that group.
For Connect Plus, if you scan into a call for a
group that is not assigned to a channel position in
the currently selected zone and you miss the Hang
Time of the call, switch to the proper zone and then
select the channel position of the group to talk back
to that group.
If you scan into a call for a group that is not
assigned to a channel position in the currently
selected zone and you miss the Hang Time of the
call, switch to the proper zone and then select the
channel position of the group to talk back to that
group.
6.3.6
Editing Priority for a Talkgroup
The Priority Monitor feature allows the radio to
automatically receive transmission from the talkgroup with
English
108