Users Manual

7.6.10
Call Indicator Settings
This feature allows you to configure call or text message
ringing tones.
7.6.10.1
Selecting a Ring Alert Type
NOTE:
The programmed Ring Alert Type button is
assigned by your dealer or system administrator.
Check with your dealer or system administrator to
determine how your radio has been programmed.
You can program the radio calls to one predetermined
vibrate call.
The radio vibrates once if it is a momentary ring style. The
radio vibrates repetitively if it is a repetitive ring style. When
set to Ring and Vibrate, the radio sounds a specific ring
tone if there is any incoming radio transaction (for example,
Call Alert or Message). It sounds like a positive indicator
tone or missed call.
For radios with batteries that support the vibrate feature
and are attached to a vibrating belt clip, the available Ring
Alert Type options are Silent, Ring, Vibrate, and Ring and
Vibrate.
For radios with batteries that do not support the vibrate
feature and are not attached to a vibrating belt clip, Ring
Alert Type is automatically set to Ring. If you press the
programmed Ring Alert Type button, a bad key tone
sounds, indicating the multiple Ring Alert Type options are
disabled.
You can select a Ring Alert Type by performing the
following action.
• Press the programmed Ring Alert Type button to
toggle Voice Announcement or Text-to-Speech, and
the radio behavior to the following options.
- For Silent, Voice Announcement or Text-to-
Speech sounds Ring Alert Type Silent only.
- For Ring Only, Voice Announcement or Text-to-
Speech sounds Ring Alert Type and the radio
sounds a ring tone.
- For Vibrate Only, Voice Announcement or Text-
to-Speech sounds Ring Alert Type and the radio
vibrates.
English
159