Users Manual
Table Of Contents
- Other Systems
- 7.1 Push-To-Talk Button
- 7.2 Programmable Buttons
- 7.3 Status Indicators
- 7.4 Zone and Channel Selections
- 7.5 Calls
- 7.6 Advanced Features
- 7.6.1 Bluetooth®
- 7.6.2 Multi-Site Control
- 7.6.3 Talkaround
- 7.6.4 Monitor Feature
- 7.6.5 Home Channel Reminder
- 7.6.6 Remote Monitor
- 7.6.7 Scan Lists
- 7.6.8 Scan
- 7.6.9 Vote Scan
- 7.6.10 Call Indicator Settings
- 7.6.11 Call Alert Operation
- 7.6.12 Mute Mode
- 7.6.13 Emergency Operation
- 7.6.13.1 Sending Emergency Alarms
- 7.6.13.2 Sending Emergency Alarms with Call
- 7.6.13.3 Emergency Alarms with Voice to Follow
- 7.6.13.4 Sending Emergency Alarms with Voice to Follow
- 7.6.13.5 Receiving Emergency Alarms
- 7.6.13.6 Exiting Emergency Mode After Receiving the Emergency Alarm
- 7.6.13.7 Reinitiating Emergency Mode
- 7.6.13.8 Exiting Emergency Mode
- 7.6.14 Man Down
- 7.6.15 Text Messaging
- 7.6.16 Privacy
- 7.6.17 Lone Worker
- 7.6.18 Password Lock
- 7.6.19 Auto-Range Transponder System
- 7.6.20 Over-the-Air Programming
- 7.6.21 Wi-Fi Operation
- 7.7 Utilities
- 7.7.1 Checking Battery Strength
- 7.7.2 Flexible Receive List
- 7.7.3 Text-to-Speech
- 7.7.4 Turning Acoustic Feedback Suppressor On or Off
- 7.7.5 Turning Global Navigation Satellite System On or Off
- 7.7.6 Turning Radio Tones/Alerts On or Off
- 7.7.7 Power Levels
- 7.7.8 Voice Operating Transmission
- 7.7.9 Turning Option Board On or Off
- 7.7.10 Turning Voice Announcement On or Off
- 7.7.11 Switching Audio Route between Internal Radio Speaker and Wired Accessory
- 7.7.12 Turning Intelligent Audio On or Off
- 7.7.13 Turning Trill Enhancement On or Off
- Authorized Accessories List
- Maritime Radio Use in the VHF Frequency Range
- Batteries and Chargers Warranty
- Limited Warranty
• Press the programmed One Touch Access
button.
3 Press the PTT button to make the call.
The green LED lights up.
4 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
7.5.9.2
Responding to OVCM Calls
When you receive an OVCM Call:
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
NOTE:
Recipient users are not allowed to Talkback during
a Broadcast Call. If the PTT button is pressed
during a Broadcast Call, the Talkback Prohibit Tone
sounds momentarily.
1 Do one of the following:
• If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond to the call.
• If the Voice Interrupt feature is enabled, press
the PTT button to interrupt the audio from the
transmitting radio and free the channel for you to
respond.
The green LED lights up.
2 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
English
149