Users Manual
Table Of Contents
- Other Systems
- 7.1 Push-To-Talk Button
- 7.2 Programmable Buttons
- 7.3 Status Indicators
- 7.4 Zone and Channel Selections
- 7.5 Calls
- 7.6 Advanced Features
- 7.6.1 Bluetooth®
- 7.6.2 Multi-Site Control
- 7.6.3 Talkaround
- 7.6.4 Monitor Feature
- 7.6.5 Home Channel Reminder
- 7.6.6 Remote Monitor
- 7.6.7 Scan Lists
- 7.6.8 Scan
- 7.6.9 Vote Scan
- 7.6.10 Call Indicator Settings
- 7.6.11 Call Alert Operation
- 7.6.12 Mute Mode
- 7.6.13 Emergency Operation
- 7.6.13.1 Sending Emergency Alarms
- 7.6.13.2 Sending Emergency Alarms with Call
- 7.6.13.3 Emergency Alarms with Voice to Follow
- 7.6.13.4 Sending Emergency Alarms with Voice to Follow
- 7.6.13.5 Receiving Emergency Alarms
- 7.6.13.6 Exiting Emergency Mode After Receiving the Emergency Alarm
- 7.6.13.7 Reinitiating Emergency Mode
- 7.6.13.8 Exiting Emergency Mode
- 7.6.14 Man Down
- 7.6.15 Text Messaging
- 7.6.16 Privacy
- 7.6.17 Lone Worker
- 7.6.18 Password Lock
- 7.6.19 Auto-Range Transponder System
- 7.6.20 Over-the-Air Programming
- 7.6.21 Wi-Fi Operation
- 7.7 Utilities
- 7.7.1 Checking Battery Strength
- 7.7.2 Flexible Receive List
- 7.7.3 Text-to-Speech
- 7.7.4 Turning Acoustic Feedback Suppressor On or Off
- 7.7.5 Turning Global Navigation Satellite System On or Off
- 7.7.6 Turning Radio Tones/Alerts On or Off
- 7.7.7 Power Levels
- 7.7.8 Voice Operating Transmission
- 7.7.9 Turning Option Board On or Off
- 7.7.10 Turning Voice Announcement On or Off
- 7.7.11 Switching Audio Route between Internal Radio Speaker and Wired Accessory
- 7.7.12 Turning Intelligent Audio On or Off
- 7.7.13 Turning Trill Enhancement On or Off
- Authorized Accessories List
- Maritime Radio Use in the VHF Frequency Range
- Batteries and Chargers Warranty
- Limited Warranty
2 Press the PTT button to make the call.
The green LED lights up. The first text line shows the
subscriber alias. The second text line shows the call
status.
3 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
Users on the channel cannot respond to a Broadcast
Voice Call.
The radio returns to the previous menu after the call
ends.
See Assigning Entries to Programmable Number Keys for
more information.
7.5.7.3
Making Broadcast Voice Calls by Using
the Alias Search
7.5.7.4
Receiving Broadcast Voice Calls
When you receive a Broadcast Voice Call:
• A tone sounds.
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
A Broadcast Voice Call does not wait for a predetermined
period before ending.
You cannot respond to a Broadcast Voice Call.
NOTE:
The radio stops receiving the Broadcast Voice Call
if you switch to a different channel while receiving
the call. You cannot continue with any programmed
button functions until the end of the Broadcast Voice
Call.
7.5.8
Unaddressed Calls
An Unaddressed Call is a group call to one of the 16
predefined group IDs.
This feature is configured using CPS-RM. A contact for one
of the predefined IDs is required to initiate and/or receive
English
146