Users Manual
Table Of Contents
- Other Systems
- 7.1 Push-To-Talk Button
- 7.2 Programmable Buttons
- 7.3 Status Indicators
- 7.4 Zone and Channel Selections
- 7.5 Calls
- 7.6 Advanced Features
- 7.6.1 Bluetooth®
- 7.6.2 Multi-Site Control
- 7.6.3 Talkaround
- 7.6.4 Monitor Feature
- 7.6.5 Home Channel Reminder
- 7.6.6 Remote Monitor
- 7.6.7 Scan Lists
- 7.6.8 Scan
- 7.6.9 Vote Scan
- 7.6.10 Call Indicator Settings
- 7.6.11 Call Alert Operation
- 7.6.12 Mute Mode
- 7.6.13 Emergency Operation
- 7.6.13.1 Sending Emergency Alarms
- 7.6.13.2 Sending Emergency Alarms with Call
- 7.6.13.3 Emergency Alarms with Voice to Follow
- 7.6.13.4 Sending Emergency Alarms with Voice to Follow
- 7.6.13.5 Receiving Emergency Alarms
- 7.6.13.6 Exiting Emergency Mode After Receiving the Emergency Alarm
- 7.6.13.7 Reinitiating Emergency Mode
- 7.6.13.8 Exiting Emergency Mode
- 7.6.14 Man Down
- 7.6.15 Text Messaging
- 7.6.16 Privacy
- 7.6.17 Lone Worker
- 7.6.18 Password Lock
- 7.6.19 Auto-Range Transponder System
- 7.6.20 Over-the-Air Programming
- 7.6.21 Wi-Fi Operation
- 7.7 Utilities
- 7.7.1 Checking Battery Strength
- 7.7.2 Flexible Receive List
- 7.7.3 Text-to-Speech
- 7.7.4 Turning Acoustic Feedback Suppressor On or Off
- 7.7.5 Turning Global Navigation Satellite System On or Off
- 7.7.6 Turning Radio Tones/Alerts On or Off
- 7.7.7 Power Levels
- 7.7.8 Voice Operating Transmission
- 7.7.9 Turning Option Board On or Off
- 7.7.10 Turning Voice Announcement On or Off
- 7.7.11 Switching Audio Route between Internal Radio Speaker and Wired Accessory
- 7.7.12 Turning Intelligent Audio On or Off
- 7.7.13 Turning Trill Enhancement On or Off
- Authorized Accessories List
- Maritime Radio Use in the VHF Frequency Range
- Batteries and Chargers Warranty
- Limited Warranty
Other Systems
Features that are available to the radio users under this
system are available in this chapter.
7.1
Push-To-Talk Button
The Push-to-Talk (PTT) button serves two basic purposes:
• While a call is in progress, the PTT button allows
the radio to transmit to other radios in the call.
The microphone is activated when the PTT button is
pressed.
• While a call is not in progress, the PTT button is used to
make a new call.
Long press the PTT button to talk. Release the PTT button
to listen.
If the Talk Permit Tone is enabled, wait until the short alert
tone ends before talking.
7.2
Programmable Buttons
Depending on the duration of a button press, your dealer
can program the programmable buttons as shortcuts to
radio functions.
Short press
Pressing and releasing rapidly.
Long press
Pressing and holding for the programmed duration.
NOTE:
See Emergency Operation on page 163 for more
information on the programmed duration of the
Emergency button.
7.2.1
Assignable Radio Functions
The following radio functions can be assigned to the
programmable buttons.
Audio Toggle
Toggles audio routing between the internal radio
speaker and the speaker of a wired accessory.
Battery Strength
Indicates battery strength by using the LED Indicator.
English
130