Users Manual
Table Of Contents
- Other Systems
- 7.1 Push-To-Talk Button
- 7.2 Programmable Buttons
- 7.3 Status Indicators
- 7.4 Zone and Channel Selections
- 7.5 Calls
- 7.6 Advanced Features
- 7.6.1 Bluetooth®
- 7.6.2 Multi-Site Control
- 7.6.3 Talkaround
- 7.6.4 Monitor Feature
- 7.6.5 Home Channel Reminder
- 7.6.6 Remote Monitor
- 7.6.7 Scan Lists
- 7.6.8 Scan
- 7.6.9 Vote Scan
- 7.6.10 Call Indicator Settings
- 7.6.11 Call Alert Operation
- 7.6.12 Mute Mode
- 7.6.13 Emergency Operation
- 7.6.13.1 Sending Emergency Alarms
- 7.6.13.2 Sending Emergency Alarms with Call
- 7.6.13.3 Emergency Alarms with Voice to Follow
- 7.6.13.4 Sending Emergency Alarms with Voice to Follow
- 7.6.13.5 Receiving Emergency Alarms
- 7.6.13.6 Exiting Emergency Mode After Receiving the Emergency Alarm
- 7.6.13.7 Reinitiating Emergency Mode
- 7.6.13.8 Exiting Emergency Mode
- 7.6.14 Man Down
- 7.6.15 Text Messaging
- 7.6.16 Privacy
- 7.6.17 Lone Worker
- 7.6.18 Password Lock
- 7.6.19 Auto-Range Transponder System
- 7.6.20 Over-the-Air Programming
- 7.6.21 Wi-Fi Operation
- 7.7 Utilities
- 7.7.1 Checking Battery Strength
- 7.7.2 Flexible Receive List
- 7.7.3 Text-to-Speech
- 7.7.4 Turning Acoustic Feedback Suppressor On or Off
- 7.7.5 Turning Global Navigation Satellite System On or Off
- 7.7.6 Turning Radio Tones/Alerts On or Off
- 7.7.7 Power Levels
- 7.7.8 Voice Operating Transmission
- 7.7.9 Turning Option Board On or Off
- 7.7.10 Turning Voice Announcement On or Off
- 7.7.11 Switching Audio Route between Internal Radio Speaker and Wired Accessory
- 7.7.12 Turning Intelligent Audio On or Off
- 7.7.13 Turning Trill Enhancement On or Off
- Authorized Accessories List
- Maritime Radio Use in the VHF Frequency Range
- Batteries and Chargers Warranty
- Limited Warranty
Silent
Radio initiates an Emergency without any audio or
visual indicators. The radio suppresses all audio or
visual indications of the Emergency until you press the
PTT button to start a voice transmission.
Silent with Voice
The same as Silent operation, except that the radio also
unmutes for some voice transmissions.
6.3.10.1
Responding to an Emergency Call
The radio does not show that it is receiving an Emergency
call. Respond the same way as you would to group calls.
6.3.10.2
Ignore Emergency Revert Call
This feature enhancement provides an option for your radio
to disregard an active Emergency Revert Call.
To enable Ignore Emergency Revert Call, your radio
must be configured through the Connect Plus Customer
Programming Software (CPCPS).
When the feature is enabled, the radio does not receive
any audio on the default Emergency Revert Group ID.
Contact with your dealer for more information.
6.3.10.3
Initiating an Emergency Call
NOTE:
If your radio is set to Silent, it does not display any
audio or visual indicators during Emergency mode
until you press the PTT button to initiate a voice
transmission.
If your radio is set to Silent with Voice, it does not
initially display any audio or visual indicators that the
radio is in Emergency mode. However, your radio
unmutes for the transmissions of radios responding
to your emergency. The emergency indicators only
appear once you press the PTT button to initiate a
voice transmission from your radio.
For both “Silent” and “Silent with Voice” operation,
the radio automatically exits silent operation after
the Emergency Call is finished.
1 Press the programmed Emergency button.
2 Press the PTT button to initiate a voice transmission
on the Emergency group.
English
115