User's Guide
Table Of Contents
- Contents
- Supplier's Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC)
- Notice to Users (Industry Canada)
- Software Version
- Intellectual Property and Regulatory Notices
- Computer Software Copyrights
- Radio Care
- Introduction
- Getting Started
- 2.1 Charging the Battery
- 2.2 Attaching the Battery
- 2.3 Attaching the Antenna
- 2.4 Attaching the Carry Holster
- 2.5 Attaching the Universal Connector Cover
- 2.6 Cleaning the Universal Connector Cover
- 2.7 Removing the Universal Connector Cover (Dust Cover)
- 2.8 Turning the Radio On
- 2.9 Turning the Radio Off
- 2.10 Adjusting the Volume
- Radio Controls
- WAVE
- Capacity Max
- 5.1 Push-To-Talk Button
- 5.2 Programmable Buttons
- 5.3 Status Indicators
- 5.4 Registration
- 5.5 Zone and Channel Selections
- 5.6 Calls
- 5.7 Advanced Features
- 5.7.1 Call Queue
- 5.7.2 Priority Call
- 5.7.3 Talkgroup Scan
- 5.7.4 Receive Group List
- 5.7.5 Priority Monitor
- 5.7.6 Multi-Talkgroup Affiliation
- 5.7.7 Talkback
- 5.7.8 Bluetooth®
- 5.7.9 Multi-Site Controls
- 5.7.10 Home Channel Reminder
- 5.7.11 Remote Monitor
- 5.7.12 Call Indicator Settings
- 5.7.13 Call Alert Operation
- 5.7.14 Mute Mode
- 5.7.15 Emergency Operation
- 5.7.16 Text Messaging
- 5.7.17 Privacy
- 5.7.18 Stun/Revive
- 5.7.19 Radio Kill
- 5.7.20 Lone Worker
- 5.7.21 Password Lock
- 5.7.22 Over-the-Air Programming
- 5.7.23 Wi-Fi Operation
- 5.8 Utilities
- 5.8.1 Checking Battery Strength
- 5.8.2 Text-to-Speech
- 5.8.3 Turning the Acoustic Feedback Suppressor Feature On or Off
- 5.8.4 Turning Global Navigation Satellite System On or Off
- 5.8.5 Turning Radio Tones/Alerts On or Off
- 5.8.6 Power Levels
- 5.8.7 Turning Option Board On or Off
- 5.8.8 Turning Voice Announcement On or Off
- 5.8.9 Switching Audio Route between Internal Radio Speaker and Wired Accessory
- 5.8.10 Turning Intelligent Audio On or Off
- 5.8.11 Turning Trill Enhancement On or Off
- Connect Plus
- 6.1 Additional Radio Controls in Connect Plus Mode
- 6.2 Making and Receiving Calls in Connect Plus Mode
5.7.23.2
Connecting to a Network Access Point
When you turn on Wi-Fi, the radio scans and connects to a
network access point.
NOTE:
The programmed Wi-Fi Status Query button is
assigned by your dealer or system administrator.
Voice Announcements for the programmed Wi-Fi
Status Query button can be customized according
to user requirements by using CPS. Check with your
dealer or system administrator to determine how
your radio has been programmed.
The WPA-Enterprise Wi-Fi network access points
are pre-configured. Check with your dealer or
system administrator to determine how your radio
has been programmed.
Press the programmed Wi-Fi Status Query
button for the connection status using Voice
Announcement.
Voice Announcement sounds when Wi-Fi is Off, Wi-
Fi is On but No Connection, or Wi-Fi is On with
Connection.
5.7.23.3
Checking Wi-Fi Connection Status
Press the programmed Wi-Fi Status Query button for the
connection status by using Voice Announcement. Voice
Announcement sounds Wi-Fi is Off, Wi-Fi is On but No
Connection, or Wi-Fi is On with Connection.
•
The display shows WiFi Off when the Wi-Fi is
turned off.
• The display shows WiFi On, Connected when the
radio is connected to a network.
•
The display shows WiFi On, Disconnected when
the Wi-Fi is turned on but the radio is not connected
to any network.
Voice Announcements for the Wi-Fi status query
results can be customized through CPS according to
user requirements. Check with your dealer or system
administrator for more information.
NOTE:
The programmed Wi-Fi Status Query button
is assigned by default. Check with your
dealer or system administrator to determine
how your radio has been programmed.
English
83