User's Guide
Table Of Contents
- Contents
- Supplier's Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC)
- Notice to Users (Industry Canada)
- Software Version
- Intellectual Property and Regulatory Notices
- Computer Software Copyrights
- Radio Care
- Introduction
- Getting Started
- 2.1 Charging the Battery
- 2.2 Attaching the Battery
- 2.3 Attaching the Antenna
- 2.4 Attaching the Carry Holster
- 2.5 Attaching the Universal Connector Cover
- 2.6 Cleaning the Universal Connector Cover
- 2.7 Removing the Universal Connector Cover (Dust Cover)
- 2.8 Turning the Radio On
- 2.9 Turning the Radio Off
- 2.10 Adjusting the Volume
- Radio Controls
- WAVE
- Capacity Max
- 5.1 Push-To-Talk Button
- 5.2 Programmable Buttons
- 5.3 Status Indicators
- 5.4 Registration
- 5.5 Zone and Channel Selections
- 5.6 Calls
- 5.7 Advanced Features
- 5.7.1 Call Queue
- 5.7.2 Priority Call
- 5.7.3 Talkgroup Scan
- 5.7.4 Receive Group List
- 5.7.5 Priority Monitor
- 5.7.6 Multi-Talkgroup Affiliation
- 5.7.7 Talkback
- 5.7.8 Bluetooth®
- 5.7.9 Multi-Site Controls
- 5.7.10 Home Channel Reminder
- 5.7.11 Remote Monitor
- 5.7.12 Call Indicator Settings
- 5.7.13 Call Alert Operation
- 5.7.14 Mute Mode
- 5.7.15 Emergency Operation
- 5.7.16 Text Messaging
- 5.7.17 Privacy
- 5.7.18 Stun/Revive
- 5.7.19 Radio Kill
- 5.7.20 Lone Worker
- 5.7.21 Password Lock
- 5.7.22 Over-the-Air Programming
- 5.7.23 Wi-Fi Operation
- 5.8 Utilities
- 5.8.1 Checking Battery Strength
- 5.8.2 Text-to-Speech
- 5.8.3 Turning the Acoustic Feedback Suppressor Feature On or Off
- 5.8.4 Turning Global Navigation Satellite System On or Off
- 5.8.5 Turning Radio Tones/Alerts On or Off
- 5.8.6 Power Levels
- 5.8.7 Turning Option Board On or Off
- 5.8.8 Turning Voice Announcement On or Off
- 5.8.9 Switching Audio Route between Internal Radio Speaker and Wired Accessory
- 5.8.10 Turning Intelligent Audio On or Off
- 5.8.11 Turning Trill Enhancement On or Off
- Connect Plus
- 6.1 Additional Radio Controls in Connect Plus Mode
- 6.2 Making and Receiving Calls in Connect Plus Mode
5.7.12.3
Escalating Alarm Tone Volume
The radio can be programmed to continually alert, when
a radio call remains unanswered. This is done by
automatically increasing the alarm tone volume over time.
This feature is known as Escalert.
5.7.13
Call Alert Operation
Call Alert paging enables you to alert a specific radio user
to call you back when they are able to do so.
This feature is accessible by using a programmed One
Touch Access button.
In Capacity Max, the Call Alert feature allows a radio user
or a dispatcher to send an alert to another radio user
requesting the radio user to call back the initiating radio
user when available. Voice communication is not involved
in this feature.
The Call Alert Operation can be configured by the dealer or
the system administrator to allow the user to press the PTT
button to respond directly to the call initiator by making a
Private Call.
An Off Air Call Set‑Up (OACSU) private call allows the user
to respond immediately while a Full Off Air Call Set‑Up
(FOACSU) private call requires user acknowledgment for
the call. OACSU type calls are therefore, recommended
being used for the Call Alert feature. See Private Call
on
page 50.
5.7.13.1
Making Call Alerts
Follow the procedure to make Call Alerts on your radio.
1 Press the programmed One Touch Access button.
The green LED lights up.
2 Wait for acknowledgment.
If the Call Alert acknowledgment is received, a
positive indicator tone sounds.
If the Call Alert acknowledgment is not received, a
negative indicator tone sounds.
English
69