User's Guide

Table Of Contents
2.3
Attaching the Antenna
Turn off your radio.
Set the antenna in the receptacle and turn clockwise.
NOTE:
To protect best against water and dust,
ensure that antenna is tightly fitted.
NOTE:
To remove the antenna, turn the antenna
counterclockwise.
CAUTION:
To prevent damages, replace the faulty antenna
with only MOTOTRBO antennas.
2.4
Attaching the Carry Holster
1 Align the rails on the carry holster with the grooves
on the battery.
2 Press downwards until you hear a click.
2.5
Attaching the Universal Connector
Cover
The universal connector is located on the antenna side of
the radio. It is used to connect MOTOTRBO accessories to
the radio.
Replace the universal connector cover or dust cover when
the universal connector is not in use.
1 Insert the slanted end of the cover into the slots
above the universal connector.
2 Press downwards on the cover to seat the dust
cover properly on the universal connector.
English
31