Declaration of Conformity

English
91
performing a radio presence check. However, FOACSU
calls require user acknowledgment to complete the call
and allows the user to either Accept or Decline the call.
The type of call is configured by the system administrator.
If the target radio is not available prior to setting up the
Private Call, the following occur:
• A tone sounds.
• The display shows a negative mini notice.
• The radio returns to the menu prior to initiating the radio
presence check.
NOTE:
Both the call initiator and recipient are able to
terminate an on-going Private Call by pressing .
5.6.3.1
Making Private Calls
Your radio must be programmed for you to initiate a Private
Call. If this feature is not enabled, you hear a negative
indicator tone when you initiate the call. If the target radio
is not available, a short tone sounds and the display show
Party Not Available.
1 Do one of the following:
• Select a channel with the active subscriber alias
or ID. See
Selecting a Call Type on page 80.
• Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up. The display shows the
Private Call icon, the subscriber alias, and call
status.
3 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
The green LED lights up when the target radio
responds.
5 The call ends when there is no voice activity for a
predetermined period. You will hear a short tone.The
display shows Call Ended.