Declaration of Conformity

English
80
5
Press to select.
The display shows <Zone> Selected momentarily
and returns to the selected zone screen.
5.5.3
Selecting a Call Type
Use the Channel Selector Knob to select a call type. This
can be a Group Call, Broadcast Call, All Call, or Private
Call, depending on how your radio is programmed. If you
change the Channel Selector Knob to a different position
(that has a call type assigned to it), this causes the radio
to re-register with the Capacity Max System. The radio
registers with the Talkgroup ID that has been programmed
5.5.4
Once the required zone is displayed (if you have
multiple zones in your radio), turn the programmed
Channel Selector Knob to select the call type.
for the new Channel Selector Knob position call type.
Your radio does not operate when selected to an
unprogrammed channel, use the Channel Selector Knob to
select a programmed channel instead.
Selecting a Site
A site provides coverage for a specific area. In a multi-site
network, the Capacity Max radio will automatically search
for a new site when the signal level from the current site
drops to an unacceptable level.
The Capacity Max system can support up to 250 sites.