Declaration of Conformity

Table Of Contents
English
557
2
3
4
5
7.7.28
Press or to Utilities. Press to select.
Press or to Radio Settings. Press to
select.
Press or to Mic AGC-A. Press to
select.
Press to enable or disable Analog Microphone
AGC.
The display shows one of the following results:
If enabled, appears beside Enabled.
If disabled, disappears beside Enabled.
Switching Audio Route between
Internal Radio Speaker and Wired
Accessory
Follow the procedure to toggle audio routing between
internal radio speaker and wired accessory.
You can toggle audio routing between the internal radio
speaker and the speaker of a wired accessory with the
condition that:
The wired accessory with speaker is attached.
The audio is not routed to an external Bluetooth
accessory.
Press the programmed Audio Toggle button.
A tone sounds when the audio route has switched.
Powering down the radio or detaching the accessory resets
the audio routing to the internal radio speaker.
7.7.29
Turning Intelligent Audio On or Off
Your radio automatically adjusts the audio volume to
overcome current background noise in the environment,