Manualshelf

Declaration of Conformity

ManualsBrandsMotorola Solutions ManualsElectronics2-Way Portable Radio
531532533534535536537538539540
Table Of Contents
English
532
4
Press or to a network access point and
press to select.
For a non-connected network access point, your radio
displays SSID, Security Mode, Identity, EAP Method,
Phase 2 Authentication, and Cert Name.
5
Press or to View Details and press
to select.
NOTE:
WPA-Personal Wi-Fi and WPA-Enterprise
Wi-Fi display different details of Network
Access Points.
WPA-Personal Wi-Fi
For a connected network access point, your radio
displays Service Set Identifier (SSID), Security Mode,
Media Access Control (MAC) address, and Internet
Protocol (IP) address.
For a non-connected network access point, your radio
displays SSID and Security Mode.
WPA-Enterprise Wi-Fi
For a connected network access point, your radio
displays SSID, Security Mode, Identity, Extended
Authentication Protocol (EAP) Method, Phase 2
Authentication, Cert Name, MAC address, IP address,
Gateway, DNS1, and DNS2.
7.6.30.9
Removing Network Access Points
NOTE:
This task is not applicable to Enterprise Wi-Fi
networks.
Perform the following actions to remove network access
points from the profile list.
1
Press to access the menu.
2
Press or to WiFi and press to select.
3
Press or to Networks and press to
select.