Declaration of Conformity

English
525
• A tone sounds. The display shows Updating
Restarting. Your radio restarts by powering off and on
again.
• You can select Restart Now or Postpone. When you
select Postpone, your radio returns to the previous
screen. The display shows the OTAP Delay Timer icon
until the automatic restart occurs.
When your radio powers up after automatic restart:
• If successful, the display shows Sw Update
Completed.
• If the program update is unsuccessful, a tone sounds,
the red LED blinks once, and the display shows Sw
Update Failed.
NOTE:
If the programming update is unsuccessful, the
software update failure indications appear every
time you turn on your radio. Contact your dealer
to reprogram your radio with the latest software to
eliminate the software update failure indications.
See
Checking Software Update Information on page 235
for the updated software version.
7.6.30
Wi-Fi Operation
This feature allows you to set up and connect to a Wi-
Fi network. Wi-Fi supports updates for radio firmware,
codeplug, and resources such as language packs and
voice announcement.
NOTE:
This feature is applicable to XPR 7550e/XPR
7580e Bluetooth and Wi-Fi models only.
Wi-Fi
®
is a registered trademark of Wi-Fi Alliance
®
.
Your radio supports WEP/WPA/WPA2-Personal and WPA/
WPA2-Enterprise Wi-Fi networks.
WEP/WPA/WPA2-Personal Wi-Fi network
Uses pre-shared key (password) based authentication.
Pre-shared key can be entered by using the menu or
CPS/RM.
WPA/WPA2-Enterprise Wi-Fi network
Uses certificate-based authentication.
Your radio must be pre-configured with a certificate.
NOTE:
Check with your dealer or system administrator
to connect to WPA/WPA2-Enterprise Wi-Fi
network.