Declaration of Conformity

English
519
5
Enter the subscriber ID, and press to proceed.
6
Press or to Radio Enable.
7
Press to select.
The display shows Radio Enable: <Subscriber
Alias or ID>. The green LED lights up.
8 Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
• The display shows a positive mini notice.
If unsuccessful:
• A negative indicator tone sounds.
• The display shows a negative mini notice.
7.6.25
Lone Worker
This feature prompts an emergency to be raised if there is
no user activity, such as any radio button press or channel
selection, for a predefined time.
Following no user activity for a programmed duration, the
radio pre-warns you using an audio indicator once the
inactivity timer expires.
If there is still no acknowledgment by you before the
predefined reminder timer expires, the radio initiates an
Emergency Alarm.
Only one of the following Emergency Alarms is assigned to
this feature:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
The radio remains in the emergency state, allowing voice
messages to proceed until action is taken. See
Emergency
Operation on page 491
for more information on ways to exit
Emergency.
NOTE:
Check with your dealer or system administrator for
more information.