Declaration of Conformity

English
422
If the call ends while you are entering the extra
digits requested by the call, your radio returns to the
screen you were on before initiating the call.
If the call fails to end, the radio returns to the
Phone Call screen. Repeat
step 11, or wait for the
telephone user to end the call.
The DTMF Tone sounds. Your radio returns to the
previous screen.
7.5.5.5
11
Press to end the call.
Making Phone Calls with the
Programmable Phone Button
12 Do one of the following:
• If the deaccess code was not preconfigured,
enter the deaccess code when the display shows
Follow the procedure to make a phone call with the
programmable phone button.
1 Press the programmed Phone button to enter into
the Phone Entry list.
De-Access Code:, and press to proceed.
The radio returns to the previous screen.
• Press the programmed One Touch Access
button.
If the entry for the One Touch Access button is
empty, a negative indicator tone sounds.
The DTMF Tone sounds and the display shows
Ending Phone Call.
If the call ends successfully:
• A tone sounds.
• The display shows Call Ended.
2
Press or to the required alias or ID.
Press to select. If the access code was not
preconfigured in the Contacts list, the display shows
Access Code:. Enter the access code and press the
button to proceed.
• The green LED lights up. The Phone Call icon
appears in the top right corner. The first text line