Declaration of Conformity

English
418
5
Enter the access code, and press to proceed.
6 Press the PTT button to respond to the call.
The RSSI icon disappears.
The access or deaccess code cannot be more than
10 characters.
The first text line shows Calling. The second text
line shows the subscriber alias or ID, and the Phone
Call icon.
If the call is successful:
• The DTMF Tone sounds.
• You hear the dialing tone of the telephone user.
• The first text line shows the subscriber alias or ID,
and the RSSI icon.
• The second text line shows Phone Call, and the
Phone Call icon.
If the call is unsuccessful:
• A tone sounds.
• The display shows Phone Call Failed and
then, Access Code:.
• Your radio returns to the screen you were on prior
to initiating the call if the access code has been
preconfigured in the Contacts list.
7 Release the PTT button to listen.
8 Enter extra digits with the keypad if requested by the
call, and press to proceed.
If the call ends while you are entering the extra
digits requested by the call, your radio returns to the
screen you were on prior to initiating the call.
The DTMF Tone sounds. Your radio returns to the
previous screen.
9
Press to end the call.
10 If the deaccess code was not preconfigured, enter
the deaccess code when the display shows De-
Access Code:, and press to proceed.
The radio returns to the previous screen. The DTMF
Tone sounds and the display shows Ending Phone
Call.