Declaration of Conformity

English
416
The access or deaccess code cannot be more than
10 characters.
4 Press the PTT button to make the call.
The green LED lights up. The display shows the
Phone Call icon at the top right corner. The first text
line shows the subscriber alias. The second text line
shows the call status.
If the call is successful:
• The DTMF Tone sounds.
• You hear the dialing tone of the telephone user.
• The first text line shows the subscriber alias.
• The display continues to show the Phone Call
icon at the top right corner.
If the call is unsuccessful:
• A tone sounds.
• The display shows Phone Call Failed and
then, Access Code:.
• If the access code has been preconfigured in the
Contacts list, your radio returns to the screen you
were on before initiating the call.
5 Press the PTT button to respond to the call. Release
the PTT button to listen.
6 Enter extra digits with the keypad if requested by the
call, and press to proceed.
If the call ends while you are entering the extra
digits requested by the call, your radio returns to the
screen you were on before initiating the call.
The Dual Tone Multi Frequency (DTMF) Tone
sounds. Your radio returns to the previous screen.
7
Press to end the call.
8 Do one of the following:
• If the deaccess code was not preconfigured,
enter the deaccess code when the display shows
De-Access Code:, and press to proceed.
The radio returns to the previous screen.
• Press the programmed One Touch Access
button.