Declaration of Conformity

English
415
• Your radio returns to the previous screen when the call
ends.
During the Phone Call, your radio attempts to end the call
when:
• You press the One Touch Access button with the
deaccess code preconfigured.
• You enter the deaccess code as the input for extra
digits.
During channel access, access or deaccess code, or extra
digits transmission, your radio responds to the On/Off ,
Volume Control, and Channel Selector buttons or knobs
only. A tone sounds for every invalid input.
During channel access, press to dismiss the call
attempt. A tone sounds.
NOTE:
The access or deaccess code cannot be more than
10 characters.
Check with your dealer or system administrator for
more information.
7.5.5.1
Making Phone Calls
Follow the procedure to make Phone Calls on your radio.
1 Do one of the following:
• Press the programmed Phone button to enter
into the Phone Entry list.
• Press the programmed One Touch Access
button. Proceed to Step 3.
2 Press or to the required alias or ID. Press
to select.
When you press the PTT button while on the Phone
Contacts screen:
• A negative indicator tone sounds.
• The display shows Press OK to Place Phone
Call.
The display shows Access Code: if the access code
was not preconfigured.
3
Enter the access code, and press to proceed.