Declaration of Conformity

Table Of Contents
English
305
the Beacon can be turned On and Off via the menu, follow
the procedure below.
1
Press to access the menu.
2
Press or to Utilities and press to
select.
3
Press or to Connect Plus and press
to select.
4
Press or to Beacon and press to select.
If Beacon is currently disabled, the Enable option is
shown.
If Beacon is currently enabled, the Disable option is
shown.
5
Press or to Enable or Disable and press
to select.
The radio shows a brief message to confirm that
Man Down Beacon was enabled (or disabled).
6.3.19.2
Resetting the Beacon
If your radio has been programmed with either the Beacon
Reset button, or the Beacon menu option, it is possible to
reset the Beacon. This stops the Beacon Tone (and also
the Visual Beacon) without turning the Beacon feature Off.
The procedure for resetting the Beacon depends on how
your radio is programmed. If programmed with a Beacon
Reset button, use the button to Reset the Beacon. When
using the programmable button to reset the Man Down
Alarms, your radio shows a brief confirmation message. If
your radio has been programmed so that the Beacon can
be Reset via the menu, follow the procedure below.
1
Press to access the menu.