Declaration of Conformity

English
298
6.3.17.6
Ignore Emergency Revert Call
This feature enhancement provides an option for your radio
to disregard an active Emergency Revert Call.
To enable Ignore Emergency Revert Call, your radio
must be configured through the Connect Plus Customer
Programming Software (CPCPS).
When the feature is enabled, the radio does not display
Emergency Call indications and does not receive any audio
on the default Emergency Revert Group ID.
Contact with your dealer for more information.
6.3.17.7
Initiating an Emergency Call
NOTE:
If your radio is set to Silent, it does not display any
audio or visual indicators during Emergency mode
until you press the PTT button to initiate a voice
transmission.
If your radio is set to Silent with Voice, it does not
initially display any audio or visual indicators that the
radio is in Emergency mode. However, your radio
unmutes for the transmissions of radios responding
to your emergency. The emergency indicators only
appear once you press the PTT button to initiate a
voice transmission from your radio.
For both “Silent” and “Silent with Voice” operation,
the radio automatically exits silent operation after
the Emergency Call is finished.
1 Press the programmed Emergency button.
2 Press the PTT button to initiate a voice transmission
on the Emergency group.
When you release the PTT button, the Emergency
call continues for the time allotted for the Emergency
Call Hang Time.