Declaration of Conformity

English
297
6.3.17.4
Responding to an Emergency Call
NOTE:
If you do not respond to the Emergency Call within
the time allotted for the Emergency Call Hang Time,
the Emergency call will end. If you want to speak
to the group after the Emergency Call Hang Time
expires, you must first select the channel position
assigned to the group (if not already selected).
Then, press PTT to start a non-Emergency Call to
the group.
1 When receiving an Emergency Call, press any
button to stop all Emergency Call received
indications.
2 Press the PTT button to initiate a voice transmission
on the Emergency group.
All radios that are monitoring this group hear your
transmission.
3 Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
The LED lights up green.
4 Release the PTT button to listen.
When the emergency initiating radio responds, the
LED blinks green. You see the Group Call icon, the
group ID, and transmitting radio ID on your display.
6.3.17.5
Responding to an Emergency Alert
NOTE:
The Group contact used for the Emergency Alert
should not be used for voice communication.
This could prevent other radios from sending and
receiving Emergency Alerts on the same group.
An Emergency Alert from a radio indicates that the user
is in an urgent situation. You may respond to the alert
by initiating a private call to the radio who declared
the emergency, initiating a group call to a designated
talk group, sending the radio a Call Alert, initiating a
Remote Monitor of that radio, etc. The proper response
is determined by your organization and the individual
situation.