Manualshelf

Declaration of Conformity

ManualsBrandsMotorola Solutions ManualsElectronics2-Way Portable Radio
291292293294295296297298299300
Table Of Contents
English
294
An Emergency Alert is used to indicate a critical situation.
You can initiate an Emergency at any time on any screen
display, even when there is activity on the current channel.
Pressing the Emergency button initiates the programmed
Emergency mode. The programmed Emergency mode may
also be initiated by triggering the optional Man Down
feature. The Emergency feature may be disabled in your
radio.
Your dealer can set the duration of a button press for the
programmed Emergency button, except for long press,
which is similar with all other buttons:
Short press
Between 0.05 seconds and 0.75 seconds.
Long press
Between 1.00 second and 3.75 seconds.
The Emergency button is assigned with the Emergency
On/Off feature. Check with your dealer for the assigned
operation of the Emergency button.
• If the short press for the Emergency button is assigned
to turn on the Emergency mode, then the long press
for the Emergency button is assigned to exit the
Emergency mode.
• If the long press for the Emergency button is assigned
to turn on the Emergency mode, then the short press
for the Emergency button is assigned to exit the
Emergency mode.
When your radio is selected to a Connect Plus zone, it
supports three Emergency modes:
Emergency Call
You must press the PTT button to talk on the assigned
emergency time slot.
Emergency Call with Voice to Follow
For the first transmission on the assigned emergency
time slot, the microphone is automatically unmuted
and you may talk without pressing the PTT button.
The microphone stays “hot” in this fashion for a time
period programmed into the radio. For subsequent
transmissions in the same Emergency call, you must
press the PTT button.
Emergency Alert
An Emergency Alert is not a voice call. It is an
emergency notification that is sent to radios that are
configured to receive these alerts. The radio sends
an emergency alert by using the control channel of
the currently registered site. The Emergency Alert is
received by radios in the Connect Plus network that are
programmed to receive them (no matter which network
site they are registered to).