Declaration of Conformity

English
277
If this group is already on the scan list for the
currently selected zone, the Delete (Group Alias)
message is displayed.
9
Press to accept the displayed message (Add or
Delete).
If deleting a group from the list, you will know the
operation is successful because the plus sign (+) will
no longer display immediately before the alias.
If adding a group to the list, you will know the
operation is successful because the plus sign (+) will
display before the alias.
If you are attempting to add a group, and the list
is already full, the radio displays List Full. If this
should occur, it will be necessary to delete a group
from the scan list prior to adding a new one.
10
When finished, press as many times as
necessary to return to the desired menu.
Understanding Scan Operation
NOTE:
If the Radio joins a call for a Zone Scan List
member from a different Zone and Call Hang Timer
expires before you are able to respond, in order
to respond, you must navigate to the Zone and
Channel of the Scan List Member and start a new
call.
There are some circumstances in which you can miss calls
for groups that are in your scan list. When you miss a call
for one of the following reasons, this does not indicate a
problem with your radio. This is a normal scan operation for
Connect Plus.
• Scan feature is not turned on (check for the scan icon
on the display).
• Scan list member has been disabled via the menu (see
Editing the Scan List on page 274).
• You are participating in a call already.
• No member of the scanned group is registered at your
site (Multisite systems only).
6.3.9